2845 - Cincinnati, Chiron, Hitachi Seiki, Hurco, OKK HM-40 & Mazak Machining Centres, Hitachi Seiki & Tornos Schaublin CNC Lathes
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Birmingham. Please see individual lots for loading information.
Lot No. 6 is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 11A is located in High Wycome. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for this item will be as follows:
Up until Wednesday 18th December 2019
and then from:
Monday 6th January 2020 to Thursday 16th January 2020
(There will be no clearance on site between 19th December
2019 and 3rd January 2020 Inclusive)
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-6 de 6
Lot 8: Tornos Schaublin 65 TM6 Y CNC Lathe
Tornos Schaublin 65 TM6 Y CNC Lathe with Fanuc 18i Control,
Twin Turrets 12-Stations with LNS Quick Load Servo II Bar Feed with
Live Tooling, Twin Spindle Collet Chucks, Tool Eye, Parts Catcher,
Conveyor Take Off System, Swarf Conveyor, 3-Jaw 210mm Chuck. S/No.
341393 (2000)
Please Note: This lot is located in Birmingham. A dismantling
and loading onto suitable vehicle charge of £350 will be
automatically added to your invoice should you be successful in
purchasing this item, blocking and securing will be at the cost of
the purchaser. All/Any tooling is being offered as
specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 8 - 8D
Combination of Lots 8 - 8D
Tornos Schaublin 65 TM6 Y CNC Lathe with Fanuc 18i Control, Twin Turrets 12-Stations with Barfeed LNS Quick Load Servo II with Live Tooling, Twin Spindle Collet Chucks, Tool Eye, Parts Catcher, Conveyor Take Off System, Swarf Conveyor, 3-Jaw 210mm Chuck. S/No. 341393 (2000)
and
Qty VDI Live Tooling Suitable for Tornos Schaublins
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
8 | Tornos Schaublin 65 TM6 Y CNC Lathe |
8a | VD1 Live Tooling |
8b | VD1 Live Tooling |
8c | VD1 Live Tooling |
8d | VD1 Live Tooling |
Lot 9: Hitachi Seiki CS25Y Vertical Lathe
Hitachi Seiki CS25Y CNC Vertical Lathe with Seicos Control, 260mm 3 Jaw Chuck, 12 Station Turret, 8 Station Pallet Changer, Swarf Conveyor, VDI Tooling, Live Tooling. S/No. CS20014 (2001)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £400 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 10: Hitachi Seiki CS25Y Vertical Lathe
Hitachi Seiki CS25Y CNC Vertical Lathe with Seicos Control,
260mm 3 Jaw Chuck, 12 Station Turret, 8 Station Pallet Changer,
Swarf Conveyor, VDI Tooling, Live Tooling. S/No. CSY20023 (2001)
Please Note: This lot is located in Birmingham. A dismantling
and loading onto suitable vehicle charge of £400 will be
automatically added to your invoice should you be successful in
purchasing this item, blocking and securing will be at the cost of
the purchaser. All/Any tooling is being offered as specifically
described.
Lot 11: Colchester Electronic Mastiff CNC Lathe
Colchester Electronic Mastiff CNC Lathe with Quick Change Tooling, Large Qty Quick Change Tooling, 3 Jaw Chuck 400mm, 4 Jaw Chuck 400mm, Quick Change Tooling, Large Qty of Quick Change Tooling, (2) 3 Point Steady’s (1) 400mm (1) 240mm, Face Plate 685mm, Gap Bed, Distance between Centres 2m, Plymovent Demister. S/No. EM0131
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 11A: Hardinge CHNC II CNC Lathe
Hardinge CHNC II CNC Lathe with Barfeed
Please Note: This lot is located in High Wycombe. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.