2831 - Second Phase - Chiron, Makino and Daewoo CNC Machining Centres, Lathes, Carl Zeiss Measurement Instruments and General Workshop Equipment no longer required by OMCAP srl, Italy
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Abbiategrasso (MI) and Sarezzo, Brescia (Italy) Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. Please see individual lots for location.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com or our Italian Office on: + 39 0732 677063 info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 98
Lot 1: Makino Model A61 Horizontal Machining Centre
Makino Model A61 Horizontal Machining Centre, Twin Pallets 60-Position Tool Changer, High Pressure, Through Spindle. S/No. 80.4409.0038 (2006)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 1A: Spare Part for Makino Model A61 Horizontal Machining Centre
Spare Part for Makino Model A61 Horizontal Machining Centre
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 3: Bridgeport Model GX650B Machining Centre
Bridgeport Model GX650B Machining Centre. S/No. 08022Z with Siemens Sinumerik Digital Control Panel, 20-Position Tool Changer.(2008)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 4: Bridgeport Model GX650B Machining Centre
Bridgeport Model GX650B Machining Centre. S/No. 08023Z with Siemens Sinumerik Digital Control Panel, 20-Position Tool Changer. (2008)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 7: Daewoo Model ACE-VC400 Vertical Machining Centre
Daewoo Model ACE-VC400 Vertical Machining Centre with Fanuc Series 21i-MB Control Panel. S/No. AV4C0257, Rotating Table, 32 Tool Changer (2005)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 9: Chiron Model FZ 22L Vertical Machining Centre
Chiron Model FZ 22L Vertical Machining Centre with Heidenhain Control Panel. S/No. 179-86, 56 Position Tool Changer (1998)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 10: Chiron Model DZ 18 W Vertical Machining Centre
Chiron Model DZ 18 W Vertical Machining Centre with Siemens Sinumerik Control Panel. S/No. 212-28, Twin Spindle, 9 Position Tool Changer each Spindle, Rotating Table (2003)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 11: Chiron FZ 12W Vertical Machining Centre
Chiron FZ 12W Vertical Machining Centre with Siemens Control Panel, Rotating Table, 20 Position Tool Changer, Swarf Conveyor KOLL. S/No. 162-83 (2002)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 12: Chiron Model FZ 12W Vertical Machining Centre
Chiron Model FZ 12W Vertical Machining Centre with GE Fanuc Series 21i-M Control Panel. S/No. 161-78, Rotating Table, 20 Position Tool Chnager, Swarf Conveyor KOLL. (2001)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 13: (2) Cabinets with Drill Bits, Grinding Tools, Tips
(2) Cabinets with Drill Bits, Grinding Tools, Tips
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.