2827A - High Quality CNC & Conventional Machinery on Behalf of a Retained Client at Halco Brighouse Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please click here to view a Brochure for this Auction
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer.
Viewing days will be available Monday 11th and Tuesday 12th November 2019. Booking by appointment only.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 91
Los 1: WFL M35-G 1800 7 Axis Millturn
WFL M35-G 1800 7 Axis Millturn with CNC Siemens 840D SL Control, Maximum Swing Over Bed 600mm, Maximum Swing Over Saddle 520mm, Maximum Distance Between Centres 1800mm, Maximum Turned Diameter 520mm, Maximum Turned Length 1500mm, B1 Rotation -110, +110 Degrees, C1 Rotation 360,000 Degrees, C2 Rotation 360,000 Degrees, X1 Traverse 600mm, Y1 Traverse 250mm, Z1 Traverse 1500mm, Z2 Traverse 1500mm, Z4 Traverse 1510mm, Rapids X1 30m/min, Y1 15m/min, Z1 & Z2 40m/min, B1 138 Degrees /Sec, Spindle Bore 77mm, Turning speeds With Chuck 3300 rpm, Turning Speed Without Chuck 4000 rpm, Milling Spindle Speeds 9000rpm, with 325mm Headstock Chuck SMW Autoblock 3 Jaw Hydraulic, 325mm Tailstock Chuck SMW Autoblock 3 Jaw Hydraulic, Tooling ...
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 1A: SMW Autoblok Hydraulic Steady
SMW Autoblok Hydraulic Steady Suitable for WFL Millturn
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 1B: WRP45 Marposs Probe
WRP45 Marposs Probe
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los *: Combination of lots 1, 1A & 1B
Combination of lots 1, 1A, & 1B
1 - WFL M35-G 1800 7 Axis Millturn with CNC Siemens 840D SL Control, Maximum Swing Over Bed 600mm, Maximum Swing Over Saddle 520mm, Maximum Distance Between Centres 1800mm, Maximum Turned Diameter 520mm, Maximum Turned Length 1500mm, B1 Rotation -110, +110 Degrees, C1 Rotation 360,000 Degrees, C2 Rotation 360,000 Degrees, X1 Traverse 600mm, Y1 Traverse 250mm, Z1 Traverse 1500mm, Z2 Traverse 1500mm, Z4 Traverse 1510mm, Rapids X1 30m/min, Y1 15m/min, Z1 & Z2 40m/min, B1 138 Degrees /Sec, Spindle Bore 77mm, Turning speeds With Chuck 3300 rpm, Turning Speed Without Chuck 4000 rpm, Milling Spindle Speeds 9000rpm, with 325mm Headstock Chuck SMW Autoblock 3 Jaw Hydraulic, 325mm Tailstock Chuck ...
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier| Losnummer | Beschreibung |
|---|---|
| 1 | WFL M35-G 1800 7 Axis Millturn |
| 1A | SMW Autoblok Hydraulic Steady |
| 1B | WRP45 Marposs Probe |
Los 2: WFL M35-G 1800 7 Axis Millturn
WFL M35-G 1800 7 Axis Millturn with CNC Siemens 840D SL Control, Maximum Swing Over Bed 600mm, Maximum Swing Over Saddle 520mm, Maximum Distance Between Centres 1800mm, Maximum Turned Diameter 520mm, Maximum Turned Length 1500mm, B1 Rotation -110, +110 Degrees, C1 Rotation 360,000 Degrees, C2 Rotation 360,000 Degrees, X1 Traverse 600mm,Y1 Traverse 250mm, Z1 Traverse 1500mm, Z2 Traverse 1500mm, Z4 Traverse 1510mm, Rapids X1 30m/min, Y1 15m/min, Z1 & Z2 40m/min, B1 138 Degrees /Sec, Spindle Bore 77mm, Turning speeds With Chuck 3300 rpm, Turning Speed Without Chuck 4000 rpm, Milling Spindle Speeds 9000rpm, Complete With 325mm Headstock Chuck SMW Autoblock 3 Jaw Hydraulic, 325mm Tailstock Chuck SMW Autoblock 3 Jaw Hydraulic, ...
Los 3: Mazak Slanturn 50NR CNC Lathe
Mazak Slanturn 50NR CNC Lathe with Mazatrol 640T CNC Control, Swing Over Bed 805mm, Swing Over Saddle 560mm, Distance Between Centres 2000mm, Spindle Speeds 1 – 1600rpm, Spindle Bore 104mm, X Axis Traverse 574mm, Z Axis Traverse 2000mm, Rapids ,X Axis 12m/min, Z 16m/min, with 10 Position Turret, 2 Point Hydraulic Steady, Programmable Tailstock, 385mm 3 Jaw Hydraulic Chuck, Swarf Conveyor, Approximate Dimensions 5815 x 2665 x 2725mm, Approximate Weight 14,000kg. S/No. 193247 (2007)
Please Note: This lot is located in West Yorkshire.
Unfortunately, there are no loading facilities on-site, dismantling
and loading will be at the cost of the purchaser. All/Any tooling
is being offered as specifically described.
Los 4: DMG CTX 510 Ecoline 3 Axis CNC Lathe
DMG CTX 510 Ecoline 3 Axis CNC Lathe with Siemens 810D and Shop Turn CNC Control, Swing Over Bed 680mm, Swing Over Saddle 465mm, Maximum Turned Length 1050mm, Spindle Speeds 32 – 3250rpm, Driven Tooling Speeds 4000rpm, Rapids 30m/min, with C Axis, Driven Tooling, 12 Position Turret, 315mm 3 Jaw Hydraulic Chuck, Programmable Tailstock, Tool Probing, Swarf Conveyor, Approximate Dimensions 5250 x 2300 x 2000mm, Approximate Weight 8100kg. S/No. 8045000336E (2011)
Please Note: This lot is located in West Yorkshire.
Unfortunately, there are no loading facilities on-site, dismantling
and loading will be at the cost of the purchaser. All/Any tooling
is being offered as specifically described.
Los 4A: VDI 40 Live Tooling
VDI 40 Live Tooling & VDI Tooling suitable for Capto Tooling and Suitable for DMG CTX 510 Eco.
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 5: Haco FAT TUR 930MN CNC Lathe
Haco FAT TUR 930MN CNC Lathe with Siemens Shop Turn CNC Control, Swing Over Bed 950mm, Swing Over Saddle 630mm, Maximum Distance Between Centres 4000mm, Spindle Speeds 4 1200rpm, Spindle Bore 320mm, Rapids 6m/min, Compete with 2 No 3 Point Fixed Steadies, Boring Bar Steady, 8 Position Duplomatic Turret, Powered Tailstock, Deep Hole Boring Bar, Swarf Conveyor, Main Motor 33kw, Approximate Dimensions 6400 x 2890 x 2170mm, Approximate Weight 10,200kg. S/No. 120452 (2012)
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 5A: VDI Capto 50 Tooling
VDI Capto 50 Tooling
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.