2816 - Engineering & Fabrication Equipment available on behalf of a Retained Client

Engineering

Auction ends on

Wednesday 11 Sep 2019 at 03:00PM (BST)
Add to calendar

Time left

Overtime bidding

Auction description

Please Note: These lots are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. 

Buyer's premium

Buyer's Premium will be charged at 16%.

VAT

Value added tax will be charged at 20%.

Viewing times

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

13 Sep 2019 at 17:00 (BST)

Final clearance date

26 Sep 2019 at 17:00 (BST)

Shipping agents

Storage contractors

Lots 61-70 of 78

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
11 Sep 2019 15:50:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
10
Buyer's premium:
16%
VAT rate:
20%

Lot 62: Churchill 37 UB Powered Hydraulic Garage Press

Churchill 37 UB Powered Hydraulic Garage Press, Capacity 50 Ton, Distance Between Uprights 42", Daylight 40"

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
11 Sep 2019 16:00:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
9
Buyer's premium:
16%
VAT rate:
20%

Lot 63: BPR Type CP30: Profile Bending Rolls

BBPR Type CP 30 Section Rolls, Two Roll Drive, Shaft Diameter 30mm, Capacity Flat 80 x 15mm, Roll Speed 8.5

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
11 Sep 2019 16:50:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
17
Buyer's premium:
16%
VAT rate:
20%

Lot 64: Boge Type C-7-LDR 270 Rotary Screw Air Compressor

Boge Type C-7-LDR 270 Rotary Screw Air Compressor, Flow Rate 0.728 m/min, Max Pressure 10 Bar, Motor Speed 3000rpm, Motor Power 5.5kw, CFM 25. BWB 270 ltr Air Receiver (2013)

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
11 Sep 2019 16:40:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
12
Buyer's premium:
16%
VAT rate:
20%

Lot 65: Hydrovane Type HV11 Rotary Air Compressor

Hydrovane Type HV11 Rotary Air Compressor with Compair Cooler, Air Reciever, Max BAR 9, Motor 11kw / 1460rpm, Flow Rate 1.7 m3./min, CFM Approx. 60 Hours 4455

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
11 Sep 2019 15:20:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
8
Buyer's premium:
16%
VAT rate:
20%

Lot 66: Fromag Type KZ.32 Vertical Key Seater

Fromag Type KZ.32 Vertical Key Seater, Bore Diameter 1/2" - 5", Keyway Width 3/16" - 1 1/4", Keyway Depth 0.55". Max. Length of Stroke 9 1/4" Max, Table Size 15" x 11 1/2".

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
11 Sep 2019 16:30:00 BST
Time left:
Bidding ended
Increment:
£50
Bids:
12
Buyer's premium:
16%
VAT rate:
20%

Lot 67: MORGAN RUSHWORTH BP50 Box & Pan Folder

MORGAN RUSHWORTH BP50 Box & Pan Folder, Maximum Capacity 50 inch, only 38 inches of Top Tooling

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
11 Sep 2019 15:20:00 BST
Time left:
Bidding ended
Increment:
£50
Bids:
6
Buyer's premium:
16%
VAT rate:
20%

Lot 68: Pneumatic Press on Stand

Pneumatic Press on Stand, Capacity 5 Ton Approx. Throat 5 inch, Daylight 7 inch with Foot Control

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
11 Sep 2019 15:20:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
6
Buyer's premium:
16%
VAT rate:
20%

Lot 69: Carbolite Type HT-6128: Oven

Carbolite Type HT-6128: Oven, Aperture 260mm x 260mm x 300mm Deep, Single Phase, Max Temp 600deg

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
11 Sep 2019 15:20:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
4
Buyer's premium:
16%
VAT rate:
20%

Lot 70: Kingsland Type A94 Sheet Metal Cropper/Guillotine

Kingsland Type A94 Sheet Metal Cropper/Guillotine, Plate 10: x 3"

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
11 Sep 2019 15:40:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
6
Buyer's premium:
16%
VAT rate:
20%

Lot 71: Clarke 450TE TURBO Arc Welding Machine

Clarke 450TE TURBO Arc Welding Machine, Cap. 40-400am, Accepts Electrodes 1.6-6mm, Power Input 230/400v

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Categories