2809 - Chiron, Makino and Daewoo CNC Machining Centres, Lathes, Carl Zeiss Measurement Instruments and General Workshop Equipment no longer required by OMCAP srl, Italy
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Abbiategrasso (MI) and Sarezzo, Brescia (Italy). Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. Please see individual lots for location.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com or our Italian Office on: + 39 0732 677063 info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 189
Los 1: Makino Model A61 Horizontal Machining Centre
Makino Model A61 Horizontal Machining Centre, Twin Pallets 60-Position Tool Changer, High Pressure, Through Spindle. S/No. 80.4409.0038 (2006)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 1A: Spare Part for Makino Model A61 Horizontal Machining Centre
Spare Part for Makino Model A61 Horizontal Machining Centre
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 2: Chiron Model DZ18KW MAG Twin Spindle Vertical Machining Centre
Chiron Model DZ18KW MAG Twin Spindle Vertical Machining Centre with GE Fanuc Series 18i-MB5 Control Panel with Rotating Table, (2) 25 Position Tool Changer, Knoll Swarf Conveyor. S/No. 196-03 (2006)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 3: Bridgeport Model GX650B Machining Centre
Bridgeport Model GX650B Machining Centre. S/No. 08022Z with Siemens Sinumerik Digital Control Panel, 20-Position Tool Changer.(2008)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 4: Bridgeport Model GX650B Machining Centre
Bridgeport Model GX650B Machining Centre. S/No. 08023Z with Siemens Sinumerik Digital Control Panel, 20-Position Tool Changer. (2008)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 5: Honor Model VL-46A Vertical Lathe
Honor Model VL-46A Vertical Lathe with Fanuc Series 18i-MB Control Panel, 12-Postion Turret. S/No. 78194 (2008)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 6: BETRIEBSANLEITUNG Model T30-2-250 Drilling Machine
BETRIEBSANLEITUNG Model T30-2-250 Double Spindle Drilling Machine (2007) with Siemens Simatic Panel Touch Control Panel, Oil Filtration System Kompkaft Bandfilter, Hyfra Refrigeration System, AR Filter
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 7: Daewoo Model ACE-VC400 Vertical Machining Centre
Daewoo Model ACE-VC400 Vertical Machining Centre with Fanuc Series 21i-MB Control Panel. S/No. AV4C0257, Rotating Table, 32 Tool Changer (2005)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 8: Daewoo Model ACE-VC 400 Vertical Machining Centre
Daewoo Model ACE-VC 400 Vertical Machining Centre, Rotopallets with Fanuc Series 18i-MB Control Panel. S/No. AV4C0112, 32 Position Tool Changer (2003)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 9: Chiron Model FZ 22L Vertical Machining Centre
Chiron Model FZ 22L Vertical Machining Centre with Heidenhain Control Panel. S/No. 179-86, 56 Position Tool Changer (1998)
Please Note: This lot is located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.