2748 - Bohner Kohle Vertical Milling Machines and Anayak Bed Mill no longer required by Bromford Industries Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Birmingham, please see individual lots for loading information.
Please Note: There is a strict clearance date. Machines must be collected from site between 14th - 18th January 2019
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-3 de 3
Lot 100: BOKO CNC WF3/12-NC Milling Machine
Boko WF3/12NC Bohner Kohle WF3/12NC-NC Vertical Milling Machine with Bosch NC Control, Maximum Spindle Speed 1800rpm, Axis Travels X=1800mm Y=1200mm Z=1500mm W=300mm B=+/-90 Degrees C=360 Degrees Additional Rotary Axis 360 Degrees 350mm Diameter, Table Dimensions 1800mm x 1200mm, 32 Station ATC, Safety Guarding Around Machine, S/No. 315 (1988), Inv Nr42-1144 (Note Fixtures Not Included)
Due to security on site, a charge for dismantling and loading to a suitable vehicle for this machine is £1200 which will automatically be added to your invoice if you are successful in purchasing this lot.
Lot 101: Boko WF2/10 Bohner Kohle WF2/10 NC Vertical Milling Machine
Boko WF2/10 Bohner Kohle WF2/10 NC Vertical Milling Machine with Heidenhain TNC 426 CA control. Spindle speed 45-3550rpm, Axis travels X=1500mm Y=1000mm Z=700mm W=300mm C=360 degrees, ISO50 Spindle Taper, Table dimensions 1000mm x 1500mm, Manual Horizontal Head, Safety Guarding around Machine. S/No. 681 (1996)
Due to security on site, a charge for dismantling and loading to a suitable vehicle for this machine is £800 which will automatically be added to your invoice if you are successful in purchasing this lot.
Lot 102: Anayak FBZ-HV-2500 Travelling Column Bed Mill
Anayak FBZ-HV-2500 Travelling Column Bed Mill with Heidenhain TNC 426 CA Control, Spindle Speed 3000rpm, Axis Travels X=2500mm Y=815mm Z=800mm 4th Axis Rotary Table Dimensions 800 x 800mm, ISO50 Spindle Taper, Universal Manual Head, Table Dimensions 2900mm x 800mm, Safety Guarding Around Machine, S/No. 12446-FBZ (1996) (Note Fixtures Not Included)
Due to security on site, a charge for dismantling and loading to a suitable vehicle for this machine is £1200 which will automatically be added to your invoice if you are successful in purchasing this lot.