2726B - Phase 3 - Large Quantity of Machine Tooling, Welding Equipment, Floor Plates & Fixtures surplus to the ongoing requirements of Howden CKD Compressors s.r.o.
In Zusammenarbeit mit
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 21.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Czech Republic export conditions and the obtaining of any applicable Export Licences
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 158
Los *: Combination of lots 3 - 3A
Combination of lots 3 & 3A
Tos Hulin SKQ 20NC Vertical Turret Lathe with KNS421 Control, Chuck size 2m. S/No. 2212019
and
3A Cupboard with Tooling
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los *: Combination of Lots 8 - 8B
Combination of Lots 8 - 8B
(3) Lots of Chuck Jaws with Riser Plates for CKD Blansko VTL
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 9: Riser Blocks
Riser Blocks
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 9A: Riser Blocks
Riser Blocks
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 9B: Riser Blocks
Riser Blocks
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 9C: Riser Blocks
Riser Blocks
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 10: Grinding Attachment suitable for Blansko Machine
Grinding Attachment suitable for Blansko Machine
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los *: Combination of Lots 12 - 12P
12 Skoda Type W200HBNC Horizontal Floor Borer. S/No. OB22920, Racking, Clamps
12A Outer Steady for Skoda W200HBNC
12B Skoda Powered Rotary Table 3.5m x 4m
12C T-Slotted Floor Plates 9.5m x 8m
12D Skoda IFWE50 Universal Machining Head
12E Skoda 1WUC63NC Right Angle Facing Head
12F Skoda P200-ob601927 Angular Grinding Head
12G Skoda 1FVW5/200ISO60 Heavy Duty Right Angle Head
12H Skoda P200-0b601927 Driven Boring Bar
12J Skoda Right Angle Head
12K D’Andrea U Tronic Facing Head
12L Skoda 1NW2-3A-200AUT 2-Axis Machining Head
12M Skoda Twin Spindle Right Angle Head
12N Skoda 1NW1-200/525 AUT ISO60 Extended Right Angle Milling Head
12P Fabrication Steel Storage Rack with Various Air Skates
Please Note: This lot is located in Prague, Czech ...
Los 16: Skoda Manual 2-Axis Head
Skoda Manual 2-Axis Head. S/No. 1237
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 17: Skoda Manual 2-Axis Head
Skoda Manual 2-Axis Head. S/No. 6963 (1973)
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.