2720 - Engineering & Fabrication Equipment available on behalf of a Retained Client
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Please Note: These lots are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 41-50 z 136
Przedmiot 41: WMW SAALFELD BS4AI Single Spindle Drill
WMW SAALFELD BS4AI Single Spindle Drill, Table 700mm x 580mm, 4 Morse Taper, Spindle Speeds 63 - 1000rpm, Power Feed to Spindle.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Przedmiot 42: Pollard Model 150A/6 Six Spindle In Line Drilling Machine
Pollard Model 150A/6 Six Spindle In Line Drilling Machine, All Spindles 3 Morse Taper, 2 Spindles with Power Feed. Spindle Speeds 86 - 1920rpm, Table Size 68" x 20", Throat 11 1/".
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Przedmiot 43: Herbert 6 Spindle Drilling & Tapping Machine
Herbert 6 Spindle Drilling & Tapping Machine, 5 Spindles No.2 Morse Taper with Electronic Tapping, Spindle Speeds 450 - 2850rpm, 1 Spindle No.2 Flash Tapper with Box of Pitch Gears, Capacity 3mm - 12mm, Table Size 68" x 15". Throat 8 3/4", All 6 Spindles with Coolant.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Przedmiot 44: Fobco 7/Eight Pillar Drill
Fobco 7/Eight Pillar Drill, Table 20' x 18", Spindle Taper 2 Morse, Spindle Speeds 51 - 2650
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Przedmiot 45: Fobco 7/Eight Single Spindle Drill
Fobco 7/Eight Single Spindle Drill, Table 18" x 15", Throat 10", Spindle 2 Morse 7/8", Spindle Speeds 51 - 2650rpm.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Przedmiot 46: Startrite EFI Geared Head Pillar Drill
Startrite EFI Geared Head Pillar Drill, Spindle Taper No.3 Morse, Drilling Capacity 1 1/4" Diameter, Spindle Speeds 95 - 2700rpm, Throat Depth 12", Compound Table Size 18" x 6", Rise & Fall, Swivel & Tilt Table, Rise & Fall Head, Power Feed to Spindle, Foot Control
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Przedmiot 47: Archdale 5' Radial Arm Drill
Archdale 5' Radial Arm Drill, Spindle Taper 4 Morse, Spindle Speeds 80 - 2000rpm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Przedmiot 48: Meca 6 Spindle Turret Drill
Meca 6 Spindle Turret Drill, Table 20" x 16" with Compound Table, Turret Tools Including 70X Tapmatic Reversable Tapping Attachments.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Przedmiot 49: Otto Muller SR30 Radial Arm Drill
Otto Muller SR30 Radial Arm Drill, Spindle Taper No.3 Morse, Spindle Speeds 250 - 1500rpm, Table Size 1140 x 550mm, Power Feed & Tapping
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Przedmiot 50: Wadkin Articulated Arm Drilling Machine
Wadkin Articulated Arm Drilling Machine, 3 Morse Spindle Taper, Throat 50" with Box Table 36" x 33" x 20".
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.