2720 - Engineering & Fabrication Equipment available on behalf of a Retained Client
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 136
Lot 21: Weipert Type WG425 Centre Lathe
Weipert Type WG425 Centre Lathe Swing Over Bed 17", Distance Between Centres 40", Spindle Bore 1 3/4", Spindle Spees 14 - 1400rpm.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 22: Stanko 1K62 Centre Lathe
Stanko 1K62 Centre Lathe, Swing Over Bed 16", Distance Between Centres 56", Spindle Speeds 12.5 - 2000. 3 Jaw Chuck, Power Feed to Saddle, Power Feed to Cross Slide
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 23: Harrison M300 Tool Room Gap Bed Centre Lathe
Harrison M300 Tool Room Gap Bed Centre Lathe, Swing Over Bed 13", Distance Between Centres 25", Spindle Bore 1 1/2", Spindle Speeds 58 - 2500.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 24: Ward 3DB Capstan Lathe
Ward 3DB Capstan Lathe with Dual Dials, Screw Cutting, Tooling, Spindle Bore 2 1/4" and 3 Jaw Chuck
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 25: Herbert 2D Capstan Lathe
Herbert 2D Capstan Lathe, Swing Over Bed 13", 10 Station Indexing Turret with Tooling, Air Operated Collet Chuck, Quick Change Indexing Tool Post and Spindle Speeds 50 - 2550.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 26: TOS Type F2V CNC 3 Axis Milling Machine
TOS Type F2V CNC 3 Axis Milling Machine with Anilam 5000 Control, Table 1000mm x 250mm, Spindle Speeds 60 - 4000rpm, Spindle Taper 40 ISO, Power Feed to all Axis, X Traverse 600mm, Y Traverse 355mm, Z Traverse 415mm, Quill Travel 152mm, Power Drawbar.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 27: XYZ Edge 2000 CNC Turret Mill
XYZ Edge 2000 CNC Turret Mill with 2 Axis Prototrak Edge Control, Table Size 1270mm x 254mm, X Axis Travel 750mm, Y Axis Travel 350mm, Z Axis Travel 350mm, Spindle Taper R8, Spindle Speeds 60 - 4200rpm (2003)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 28: Ajax AJT-4 Turret Milling Machine
AJAX AJT-4 Turret Milling Machine,Table Size 54" x 11". Long Travel 34". Cross Travel 15". Spindle Taper 40 ISO. Variable Spindle Speeds 50 - 3750rpm. Power Feeds & Rapid in X/Y/Z, Power Feed to Quill.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 29: Ajax AJT-3 Turret Milling Machine
Ajax AJT-3 Turret Milling Machine, Table Size 50" x 10", Spindle Taper 40 ISO, Variable Spindle Speeds 50 - 3750rpm, Power Feed & Rapid to X Axis, Power Feed to Quill, 2 Axis Digital Readout.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 30: Elga Turret Milling Machine
Elga Turret Milling Machine, Table 43" x 10", Spindle Taper 40 ISO, Spindle Speeds 70 - 2300rpm, Manual Table Feeds, 2 Axis Digital Readout.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.