2704 - CNC, Conventional and Toolroom Equipment no longer required due to the reorganisation of Technical Moulding Projects
Engineering
La subasta finalizó el
Tiempo restante
Descripción de la subasta
Location: These lots are located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Prima del comprador
A los compradores Premium se les cobrará un 16.00%.
IVA
El IVA ascenderá a un 20.00%.
Vista de horas
Viewing will be available by appointment only with the Auctioneer. Viewings are available Monday - Thursday between 9am and 3pm and Friday between 9 - 12pm. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com prior to visiting site to confirm a viewing. Machines are under power but cannot be demonstrated.
* Tenga en cuenta: - Cualquier traducción mediante Google Translate no está garantizada como una traducción precisa y es solo para fines de guía. La descripción del lote en inglés es la descripción predominante y se le da el mejor conocimiento del subastador. Sin embargo, la precisión no está garantizada y el comprador debe verificarla antes de hacer una oferta.
Aviso a compradores
Fecha final de pago
Fecha final de expedición
Transportistas
Empresas de almacenamiento
Exportar / Importar desde el Reino Unido detalles
Lotes 1-10 de 30
Lote 100: Hurco VMX 30T Machining Centre
Hurco VMX 30T Machining Centre with Dual Control with Graphics, Table Size 1020mm x 510mm, CAT40 Tooling, 24-Station Tool Changer, Swarf Conveyor, Spindle Chiller, 12,000rpm. S/No. H-H30838 (2012)
Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíLote 100A: Qty of CAT40 Tooling
Qty of CAT40 Tooling
Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíLote *: Combination of Lot 100 & 100A
Combination of Lot 100 & 100A
Hurco VMX 30T Machining Centre with Dual Control with Graphics, Table Size 1020mm x 510mm, CAT40 Tooling, 24-Station Tool Changer, Swarf Conveyor, Spindle Chiller, 12,000rpm. S/No. H-H30838 (2012)
and
Qty of CAT40 Tooling
Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Lotes en esta combinación
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíN° de lote | Descripción |
---|---|
100 | Hurco VMX 30T Machining Centre |
100A | Qty of CAT40 Tooling |
Lote 101: Hurco VSX24 Machining Centre with Ultimax SSM Control
Hurco VSX24 Machining Centre with Ultimax SSM Control, Table Size 760mm x 510mm, 10,000rpm, 24-Station Tool Changer, CAT40 Tooling. S/No. H20384 (2002)
Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíLote 101A: Qty of CAT40 Tooling
Qty of CAT40 Tooling
Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíLote *: Combination of Lot 101 & 101A
Combination of Lot 101 & 101A
Hurco VSX24 Machining Centre with Ultimax SSM Control, Table Size 760mm x 510mm, 10,000 RPM, 24-Station Tool Changer, CAT40 Tooling. S/No. H20384 (2002)
and
Qty of CAT40 Tooling
Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Lotes en esta combinación
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíN° de lote | Descripción |
---|---|
101 | Hurco VSX24 Machining Centre with Ultimax SSM Control |
101A | Qty of CAT40 Tooling |
Lote 102: Charmilles Robofil 290P Non-Submerged 5 Axis CNC Wire EDM
Charmilles Robofil 290P Non-Submerged 5 Axis CNC Wire EDM with Charmilles Control, 700mm x 500mm Work Surface, Auto Wire Thread, Axis Travel X = 400mm, Y = 250mm, Z = 200mm, Maximum Work Piece dimensions X = 850mm, Y = 500mm, Z = 200mm, 30o Taper Cut, Non-Submerged Cutting, Auto Wire Thread, Wire Capacity 0.1 - 0.3mm Optional Guides, Hand Box Control, CRT Screen Monitor, 3-side Clamping Frame. S/No. 925677331428 (2000)
Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Lote 103: Charmilles Roboform 30 CNC EDM Machine
Charmilles Roboform 30 CNC EDM Machine with Charmilles CNC Control, On board Programming, Tool Changer, Full 'C' Axis, Table Size 500mm x 400mm, Tank Size 850mm x 550mm x 350mm Depth, Magnetic Chuck 380mm x 200mm, 4 Axis CNC EDM with C Axis and 4-Station Tool Changer, Axis Travel X = 350mm, Y = 250mm, Z = 300mm, C Axis 360o, Maximum Work Piece dimensions X = 940mm, Y = 590mm, Z = 300mm, C Axis 360o, Full 4 Axis Erosion with Vector, Free and Servo Planetry, 4 Station Tool Changer, 64A Generator, Handbox Control. S/No. 75015/625122 (1997)
Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser. ...
Lote 104: Charmilles Roboform 31 CNC EDM machine
Charmilles Roboform 31 used CNC EDM Machine with Charmilles CNC Control, On Board Programming, 4 Axis CNC EDM, C Axis and 4 Station Tool Changer, Axis Travel X = 350mm, Y = 250mm, Z = 300mm, C Axis 360o, Maximum Work Piece dimensions, X 780mm, Y 530mm, Z 300mm, C Axis, Full 4 Axis Erosion with Vector, Free and Servo Planetry, 4 Station Tool Changer, 64A Generator, Handbox control. S/No. 9-5106/635285 (1999)
Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Lote 105: Charmilles Form 2-LC Spark Eroder
Charmilles Form 2-LC Spark Eroder with Anilam Z-530 DRO, Table Size 500mm x 350mm, Tank Size 750mm x 480mm x 350mm Depth, Magnetic Chuck 260mm x 130mm and 3R System Tooling. S/No. 91011057.FC (1997)
Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.