2702 - Gildemeister CNC Lathe, Automated Finishing Lines and Ancillary Equipment no longer required by Camo Due SAS, Italy
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These Lots are located in Ancona, Italy. Dismantling & loading will be at the cost of the purchaser. Loading is available at a charge, please see individual lots for information or contact our Italian office at info@cottandco.it
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 19
Lot 1: Gildemeister GLD20 4-Axis CNC Lathe
Gildemeister GLD20 4-Axis CNC Lathe with GE Fanuc 18i-T Control, Max. Bar Diameter: 20 mm. S/No. 5401-0489 (2001) & LNS Express 226 Bar Loader, Max. Bar Diameter: 26mm. S/No. 100497 (2000)
Please Note: This Item has been dismantled for convenience of removal.
Please Note: This Lot is located in Ancona, Italy. Dismantling & Loading will be at the cost of the purchaser. Loading is available at a charge of 150 euros, please contact our Italian office at info@cottandco.it for information.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 1A: Automated Finishing Line
Automated Finishing Line composing of: RRRobotica Antropomorhous ATOM 10 Robot. S/No. A-11660 (2001) and RRRobotica Finishing Work Center UCB 9 Control Panel. S/No. C-26573 (2001), Conveyor Belt Type: H 4000M. S/No. H-11661 (2001) Control Panel: UCB 9. S/No. C-26574 (2001)
Please Note: This Item has been dismantled for convenience of removal.
Please Note: This Lot is located in Ancona, Italy. Dismantling & Loading will be at the cost of the purchaser. Loading is available at a charge of 200 euros, please contact our Italian office at info@cottandco.it for information.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 1 & 1A
Combination of Lots 1 & 1A
Gildemeister GLD20 4-Axis CNC Lathe with GE Fanuc 18i-T Control, Max. Bar Diameter: 20 mm. S/No. 5401-0489 (2001) & LNS Express 226 Bar Loader, Max. Bar Diameter: 26mm. S/No. 100497 (2000)
and;
Automated Finishing Line composing of: RRRobotica Antropomorhous ATOM 10 Robot. S/No. A-11660 (2001) and RRRobotica Finishing Work Center UCB 9 Control Panel. S/No. C-26573 (2001), Conveyor Belt Type: H 4000M. S/No. H-11661 (2001) Control Panel: UCB 9. S/No. C-26574 (2001)
Please Note: These Items have been dismantled for convenience of removal.
Please Note: This Lot is located in Ancona, Italy. Dismantling & Loading will be at the cost of the purchaser. Loading is available at a charge of 300 euros, please ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
1 | Gildemeister GLD20 4-Axis CNC Lathe |
1A | Automated Finishing Line |
Lot 2: Gildemeister GLD20 4-Axis CNC Lathe
Gildemeister GLD20 4-Axis CNC Lathe with GE Fanuc OT Control, Max. Bar Diameter: 20 mm. S/No. 5400-0307 (200) & LNS Express 226 Bar Loader, Max. Bar Diameter: 26mm. S/No. 100338 (1999)
Please Note: This Item has been dismantled for convenience of removal.
Please Note: This Lot is located in Ancona, Italy. Dismantling & Loading will be at the cost of the purchaser. Loading is available at a charge of 150 euros, please contact our Italian office at info@cottandco.it for information.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 2A: Automated Finishing Line
Automated Finishing Line composing of: RRRobotica CL 1000 Finishing Work Center. S/No. CL-11571 (2000) UCB 8 Control Panel. S/No. CL-11571 (2000) and RRRobotica ATOM 10 Antropomorhous Robot S/No. O-11559 (2000) UCB 8 Control Panel. S/No. O-11559 (2000), Automated Conveyor Belt Type: H 4000M. S/No. H-11570 (2000), UCB 8 Control Panel. S/No. C-26524 (2000)
Please Note: This Item has been dismantled for convenience of removal.
Please Note: This Lot is located in Ancona, Italy. Dismantling & Loading will be at the cost of the purchaser. Loading is available at a charge of 200 euros, please contact our Italian office at info@cottandco.it for information.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 2 & 2A
Combination of Lots 2 & 2A
Gildemeister GLD20 4-Axis CNC Lathe with GE Fanuc OT Control, Max. Bar Diameter: 20 mm. S/No. 5400-0307 (200) & LNS Express 226 Bar Loader, Max. Bar Diameter: 26mm. S/No. 100338 (1999)
and;
Automated Finishing Line composing of: RRRobotica CL 1000 Finishing Work Center. S/No. CL-11571 (2000) UCB 8 Control Panel. S/No. CL-11571 (2000) and RRRobotica ATOM 10 Antropomorhous Robot S/No. O-11559 (2000) UCB 8 Control Panel. S/No. O-11559 (2000), Automated Conveyor Belt Type: H 4000M. S/No. H-11570 (2000), UCB 8 Control Panel. S/No. C-26524 (2000)
Please Note: This Lot is located in Ancona, Italy. Dismantling & Loading will be at the cost of the purchaser. Loading is available at a charge of 300 euros, ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
2 | Gildemeister GLD20 4-Axis CNC Lathe |
2A | Automated Finishing Line |
Lot 3: Serrmac 15 Single Head Drill on Stand
Serrmac 15 Single Head Drill on Stand
Please Note: This Lot is located in Ancona, Italy. Dismantling & Loading will be at the cost of the purchaser. Loading is available at a charge of 50 Euros, please contact our Italian office at info@cottandco.it for information.
Lot 4: Belt Grinder
Belt Grinder
Please Note: This Lot is located in Ancona, Italy. Dismantling & Loading will be at the cost of the purchaser. Loading is available at a charge of 25 euros, please contact our Italian office at info@cottandco.it for information.
Lot 5: Femi Double Headed Grinder
Femi Double Headed Grinder
Please Note: This Lot is located in Ancona, Italy. Dismantling & Loading will be at the cost of the purchaser. Loading is available at a charge of 25 euros, please contact our Italian office at info@cottandco.it for information.
Lot 6: Nebes SE/9 Double Headed Grinder
Nebes SE/9 Double Headed Grinder. S/No. 2807 (2000)
Please Note: This Lot is located in Ancona, Italy. Dismantling & Loading will be at the cost of the purchaser. Loading is available at a charge of 25 euros, please contact our Italian office at info@cottandco.it for information.