2688 - Mazak CNC Lathes & Machining Centres, Okomoto and Magerle Grinders previously used by Precision Ceramics & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Birmingham, Gloucester and West Sussex. Please see individual lots for loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-3 de 3
Lot 1: Mazak Integrex 300SY CNC Multi Tasking Milling/Turning Centre
Mazak Integrex 300SY CNC Multi Tasking Milling/Turning Centre with Mazatrol PC Fusion 640 Control System, Axis Travels X=580mm Y=210mm Z=1137mm, Z2=1110mm C Axis on Main and Sub Spindle 0.001 Degrees, B Axis, Main and Sub Spindle 35-3500rpm, Milling Spindle 15-6000rpm, Distance Between Chucks 1200mm, 40 Station ATC, Rapid Feedrates X/Z 30m/min, Y 15m/min, 75mm Spindle Bore, Fitted with B210 Kitagawa Chucks on Main and Sub Spindles, Through Tool Coolant, Swarf Conveyor, Tool Presetter, Renishaw Probe Interface (Please Note: No Probe) S/No. 152795 (12/2000)
Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 2: Mazak Nexus QTN 200M CNC Turning Centre
Mazak Nexus QTN 200M CNC Turning Centre with Mazatrol 640T Nexus Control System, Axis Travels X=230mm Z=580mm C=360 Degrees (0.001), Maximum Spindle Speed 6000rpm, Maximum Milling Spindle Speed 5000rpm, 12 Station Turret, Tool Presetter. S/No. 175804 (2005) (Please Note: No Swarf Conveyor)
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 3: Mazak Super Quick Turn 15MS Mark II CNC Turning Centre
Mazak Super Quick Turn 15MS Mark II CNC Turning Centre, Mazatrol T Plus Control System, Axis Travels X=180mm Z=600mm C=0.001 Degrees, Main Spindle 5000rpm, Sub Spindle 6000rpm, Milling 3000rpm, 12 Station Turret, Tool Presetter, Parts Catcher, Swarf Conveyor. S/No.121467 (1996)
Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.