2683 - Due to Reorganisation in the Ongoing Business, Equipment previously used by Pickersgill-Kaye Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These Items are located in Leeds. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 5A however is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 39
Lot 1: Gildermeister CTX410 CNC Lathe
Gildermeister CTX410 CNC Lathe with Heidenhain Plus IT Control, S/No. 01360011601 (2008) Live Tooling, 12 Station Turret, MPT Collet Chuck No. 77685560 5000rpm, 150mm 3 Jaw Sub Spindle, Parts Catcher, Swarf Conveyor with Filtermist and Multi-feed Barfeed MX-1B S/No. 5852
Please Note: This Item is located in Leeds. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 2: Gildermeister CTX 400 CNC Lathe
Gildermeister CTX 400 CNC Lathe Serie 2 with Heidenhain CNC Pilot 3/90 Control, Swarf Conveyor Type CTX-40052. S/No. 01160008401 (2000) 12 Station Turret, Tailstock, Partscatcher 210mm 3 Jaw Chuck with Multifeed, Short Magazine Barfeed Model ML1. S/No. 004200
Please Note: This Item is located in Leeds. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 3: Gildermeister CTX 400 52 CNC Lathe
Gildermeister CTX 400 52 CNC Lathe Serie 2 with Heidenhain CNC Pilot Control, Collet Chuck, SMW Auto Block KSZ-MB-060-2170 088175, Tailstock, Swarf Conveyor, 12 Station Turret, Parts Catcher. S/No. 01160002901 (1999) Multifeed Barfeed MX-1B
Please Note: This Item is located in Leeds. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 4: Kryle KL200 CNC Lathe
Kryle KL200 CNC Lathe with GE Fanuc Series 0-T Control, Collet Chuck, 12 Station Turret, Tailstock, Swarf Conveyor, Parts Catcher. S/No. K31065 Multifeed ML1 Short Magazine CNC Barfeed. S/No. 003125
Please Note: This Item is located in Leeds. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 5: Bridgeport VMC 800 30 Machining Centre
Bridgeport VMC 800 30 Machining Centre with Heidenhain TNC 407 Control, 30 Station Tool Changer, Table Size 1m x 490mm. S/No. 20980 (02/2002)
Please Note: This Item is located in Leeds. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 5A: Deckel Maho DMU 50 Machining Centre
Deckel Maho DMU 50 Machining Centre with Heidenhain TNC 530 Control, 60-Station Tool Changer, 18,000 RPM Spindle, HSK 63 Tooling, Table Size 500mm x 380mm, Tool Sensors. S/No. 1104553800K (2003)
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 6: Kryle KVC 7F Machining Centre
Kryle KVC 7F Machining Centre with GE Fanuc Series O-M Control, BT40 Tooling, Swarf Conveyor, Table size 1m x 450mm, 20 Station Toolchanger. S/No. K31063 (06/1998)
Please Note: This Item is located in Leeds. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 7: Kryle VMC 700F Machining Centre
Kryle VMC 700F Machining Centre with GE Fanuc Series OLM Control, Swarf Conveyor, BT40 Tooling, Station Toolchanger, Table size 1m x 450mm. S/No. K31024 (05-1997)
Please Note: This Item is located in Leeds. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 8: Kryle VMC700F Machining Centre
Kryle VMC700F Machining Centre with GE Fanuc Series OM Control, BT40 Tooling, 20 Station Toolchanger, Swarf Conveyor, Table size 1m x 450mm. S/No. K30989 (03/1995)
Please Note: This Item is located in Leeds. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 9: Bridgeport INT72OH Machining Centre
Bridgeport INT72OH Machining Centre with Heidenhain TNC 2500B Control, Table Size 900mm x 380mm, 20 Station Tool Changer, BT40 Tooling. S/No. 70790 (08/1993)
Please Note: This Item is located in Leeds. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.