2674 - Large Selection of Extrusion Blow Moulding & Injection Stretch Blow Moulding Machinery & Ancillary Equipment previously used in the Manufacturing of Detergent & Soap Bottles by Pizzolotto Detersivi dal 1919 srl, Belluno, Italy
Miscellaneous
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Belluno, Italy.
Unfortunately, there are no loading facilities available
on-site. Dismantling and Loading will be at the cost of
the purchaser.
Please click here to view the products manufactured with this equipment
Please click here to view Loading Fees for lots in this auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 41-50 de 141
Lot 15: TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 41901 (1994) with Barber-Colman Control Panel, (2) 50/25 Extruder, (1) 70/25 Extruder, 4 Heads, Clamping Force 220KN, Mould Labelling, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3100
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 15A: Moulds for TECHNE SYSTEM 15000S (1) Pallet
Moulds for TECHNE SYSTEM 15000S (1) Pallet
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €20
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 15 & 15A
Combination of lots 15 & 15A
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 41901 (1994) with Barber-Colman Control Panel, (2) 50/25 Extruder, (1) 70/25 Extruder, 4 Heads, Clamping Force 220KN, Mould Labelling, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for TECHNE SYSTEM 15000S (1) Pallet
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3120
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
15 | TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine |
15A | Moulds for TECHNE SYSTEM 15000S (1) Pallet |
Lot 16: Spare Clamp suitable for TECHNE 15000S Blow Moulding Machines
Spare Clamp suitable for TECHNE 15000S Blow Moulding Machines
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30
Lot 17: AUTOMA FLUS PACK 850/2V Blow Moulding Machine
AUTOMA FLUS PACK 850/2V Blow Moulding Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €430
Lot 18: MAGIC MG-L2ND Blow Moulding Machine
MAGIC MG-L2ND Blow Moulding Machine. S/No. 3-85 (1985)
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €430
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 18A: Various Tooling for AUTOMA and MAGIC MAX 3
Various Tooling for AUTOMA and MAGIC MAX 3
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €50
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 18 & 18A
Combination of lots 18 & 18A
MAGIC MG-L2ND Blow Moulding Machine. S/No. 3-85 (1985)
and
Various Tooling for AUTOMA and MAGIC MAX 3
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €480
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
18 | MAGIC MG-L2ND Blow Moulding Machine |
18A | Various Tooling for AUTOMA and MAGIC MAX 3 |
Lot 19: MAGIC MAX 3 Blow Moulding Machine
MAGIC MAX 3 Blow Moulding Machine. S/No. 25-85
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €480
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 19A: Various Moulds (Approx 18) Pallets
Various Moulds (Approx 18) Pallets
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €200