2674 - Large Selection of Extrusion Blow Moulding & Injection Stretch Blow Moulding Machinery & Ancillary Equipment previously used in the Manufacturing of Detergent & Soap Bottles by Pizzolotto Detersivi dal 1919 srl, Belluno, Italy
Miscellaneous
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Please Note: These lots are located in Belluno, Italy.
Unfortunately, there are no loading facilities available
on-site. Dismantling and Loading will be at the cost of
the purchaser.
Please click here to view the products manufactured with this equipment
Please click here to view Loading Fees for lots in this auction
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 22.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 31-40 z 141
Przedmiot *: Combination of lots 11 & 11A
Combination of lots 11 & 11A
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 90063 (1998) with Barber-Colman Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Bottle Stripe Facility with Dedicated Control, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for TECHNE SYSTEM 15000S (1) Pallet
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3120
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
11 | TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine |
11A | Moulds for TECHNE SYSTEM 15000S (1) Pallet |
Przedmiot 12: TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 90037 (1997) with Barber-Colman Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Bottle Stripe Facility with Dedicated Control, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3100
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 12A: Moulds for TECHNE SYSTEM 15000S (4) Pallets
Moulds for TECHNE SYSTEM 15000S (4) Pallets
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €40
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of lots 12 & 12A
Combination of lots 12 & 12A
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 90037 (1997) with Barber-Colman Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Bottle Stripe Facility with Dedicated Control, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for TECHNE SYSTEM 15000S (1) Pallet
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3140
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
12 | TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine |
12A | Moulds for TECHNE SYSTEM 15000S (4) Pallets |
Przedmiot 13: TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 41925 (1994) with Barber-Colman Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3100
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 13A: Moulds for TECHNE SYSTEM 15000S (2) Pallets
Moulds for TECHNE SYSTEM 15000S (2) Pallets
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €20
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of lots 13 & 13A
Combination of lots 13 & 13A
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 41925 (1994) with Barber-Colman Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for TECHNE SYSTEM 15000S (2) Pallets
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3120
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
13 | TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine |
13A | Moulds for TECHNE SYSTEM 15000S (2) Pallets |
Przedmiot 14: TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 41912 (1994) with Barber-Colman Control Panel, (2) 50/25 Extruder, (1) 70/25 Extruder, 4 Heads, Clamping Force 220KN, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3100
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 14A: Moulds for TECHNE SYSTEM 15000S (1) Pallet
Moulds for TECHNE SYSTEM 15000S (1) Pallet
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €20
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of lots 14 & 14A
Combination of lots 14 & 14A
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 41912 (1994) with Barber-Colman Control Panel, (2) 50/25 Extruder, (1) 70/25 Extruder, 4 Heads, Clamping Force 220KN, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for TECHNE SYSTEM 15000S (1) Pallet
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3120
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
14 | TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine |
14A | Moulds for TECHNE SYSTEM 15000S (1) Pallet |