2669 - Fabrication and Ancillary Equipment no longer required by Tara Fabrications Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in East Kilbride, Glasgow. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lot 7A however is located in Birmingham
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 35
Los 1: AFM Fabtek NPF 31-80 Hydraulic Downstroking Press Brake
AFM Fabtek NPF 31-80 Hydraulic Downstroking Press Brake with Light Guards, 3m Length
Please Note: This lot is located in East Kilbride, Glasgow. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Los 2: Adira QH-10030 Upstroking Press Brake
Adira QH-10030 Upstroking Press Brake with Universal Light Guards, 3m Length. S/No. 2039/4254 (1987)
Please Note: This lot is located in East Kilbride, Glasgow. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Los 3: Kingsland KPT12560 Hydraulic Press Brake
Kingsland KPT12560 Hydraulic Press Brake with ATL 550 Programmer, Safety Scan and Light Guards, 2.5m Length. S/No. 58639 (1998)
Please Note: This lot is located in East Kilbride, Glasgow. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Los 4: Kingsland KSB-3006 Hydraulic Guillotine
Kingsland KSB-3006 Hydraulic Guillotine, 3000mm x 6mm. S/No. 3605 (1996)
Please Note: This lot is located in East Kilbride, Glasgow. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Los 5: Adira GH0-0630 Hydraulic Guillotine
Adira GH0-0630 Hydraulic Guillotine, 3m length. S/No. 1374 - 4127 (1986)
Please Note: This lot is located in East Kilbride, Glasgow. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Los 6: Morgan PBR2000-4 Powered Pyramid Bending Rolls
Morgan PBR2000-4 Powered Pyramid Bending Rolls, 4mm (Mild Steel) 2m length. S/No. 5IRG 1079JAS
Please Note: This lot is located in East Kilbride, Glasgow. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Los 7: Edwards Manual Bending Press
Edwards Manual Bending Press, 1m length. S/No. 68907
Please Note: This lot is located in East Kilbride, Glasgow. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Los 7A: Pierce-All Manual Punch with Newall DRO Readout
Pierce-All Manual Punch with Newall DRO Readout, Throat Size 35'' includes Punch and Die Tooling.
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 8: Kingsland 35XA Hydraulic Metal Worker
Kingsland 35XA Hydraulic Metal Worker. S/No. 59687
Please Note: This lot is located in East Kilbride, Glasgow. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Los 9: Euromac 200/6 Corner Notcher
Euromac 200/6 Corner Notcher. S/No. 3800/00 (2000)
Please Note: This lot is located in East Kilbride, Glasgow. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.