2651 - CNC Machining Centres, Lathes and Grinders no longer required by British Production Engineers and Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Gloucester and Birmingham. Please see individual lots for location and loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 26
Lot 1: Matsuura Cublex 25 5 Axis Twin Pallet Turning/Milling Machine
Matsuura Cublex 25 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 15000rpm, HSK 63 Spindle Taper, Axis Travels X=550mm Y=410mm Z=450mm B=220 Degrees (-110/+110) C 360 Degrees, Maximum Table Speed for Turning 3000rpm, Rapid Feedrates 50m/Min 150 Station ATC, FSE Filtration System, 40 Bar Through Spindle Coolant, Filtermist FX4000 Fume Extraction, Pallet Diameter 130mm, Maximum Component Size D=250mm H=250mm, Renishaw Probe Interface, Tool Presetter, Swarf Conveyor, Swarf Bin, Approximately 12 Additional Pallets. S/No. 17777 (7/2008)
Please Note: New spindle 2 years ago
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable ...
Lot 2: Webster Bennett 54 EV Elevating Rail Ram Type CNC Vertical Borer
Webster Bennett 54 EV Elevating Rail Ram Type CNC Vertical Borer, recently fitted with Siemens Sinumerik 802 Control, 3 Position Tool Post, 54" Diameter 4 Jaw Chuck, Maximum Speed 175rpm, 60'' Swing, Height under Cross Slide 45'', Cross Slide Rise and Fall 24'', Ram Travel 36'', Turret Traverse 36''
Please Note: This lot is located in Gloucester and for convenience of sale, has been dismantled and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 3: Doosan HP5100 Twin Pallet Horizontal Machining Centre
Doosan HP5100 Twin Pallet Horizontal Machining Centre, Fanuc Series 30i-Model A Control System, Maximum Spindle Speed 12000rpm, Spindle Taper BT40, Axis Travels X=850mm Y=700mm Z=700mm B=360 Degrees (0.001), 80 Station ATC, Renishaw NC4 Laser Tool Presetter, Renishaw Spindle Probe Interface with Renishaw MP10 Probe, Swarf Conveyor, Through Spindle Coolant, Power On Time 27534 Hrs. S/No HP510276 (10/2010)
Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3A: Cabinet of 72 BT40 Tools
Cabinet of 72 BT40 Tools
Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 3 & 3A
Combination of Lots 3 & 3A
Lot 3 - Doosan HP5100 Twin Pallet Horizontal Machining Centre Fanuc Series 30i-Model A Control System, Maximum Spindle Speed 12000rpm, Spindle Taper BT40, Axis Travels X=850mm Y=700mm Z=700mm B=360 Degrees (0.001), 80 Station ATC, Renishaw NC4 Laser Tool Presetter, Renishaw Spindle Probe Interface with Renishaw MP10 Probe, Swarf Conveyor, Through Spindle Coolant, Power On Time 27534 Hrs. S/No HP510276 (10/2010)
and
Lot 3A - Cabinet of 72 BT40 Tools
Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 3 | Doosan HP5100 Twin Pallet Horizontal Machining Centre |
| 3A | Cabinet of 72 BT40 Tools |
Lot 4: Hyundai SPT-V30TD Twin Pallet Vertical Machining Centre
Hyundai SPT-V30TD Twin Pallet Vertical Machining Centre with Yasnak MX-3 Control System, Maximum Spindle Speed 8000rpm, BT30 Spindle Taper, Axis Travels X=500mm Y=300mm Z=300mm, Rapid Feed Rates 30m/min, Pallet Dimensions 900mm x 600mm, 14 Station Tool Carousel. S/No. 73TDD836
Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 5: Mazak AJV 32/604N Machining Centre
Mazak AJV 32/604N Vertical Machining Centre fitted with Mazatrol M32 Control System, Axis Travels X=1500mm Y=700mm Z=460mm, Maximum Spindle Speed 4000rpm, ISO40 Spindle Taper, 40 Station ATC, Table dimensions 1740mm x 650mm, Distance between Columns 800mm, Maximum load on Table 1500kg. S/No. 106449 (1993)
Please Note: This Lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 6: Mazak AJV 25/404 CNC Vertical Machining Centre
Mazak AJV 25/404 CNC Vertical Machining Centre with Mazatrol M32 Control System Maximum Spindle Speed 4000rpm, ISO 40 Spindle Taper, Axis Travels X=1000mm Y=508mm Z=460mm, 30 Station ATC, Table Dimensions 1240mm X 550mm, Maximum Weight on Table 800kg, Swarf Conveyor. S/No. 74200
Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 7: Cincinnati Milacron Lancer 1250 Vertical CNC Machining Centre
Cincinnati Milacron Lancer 1250 Vertical CNC Machining Centre with Acramatic A2100 CNC Control, 30 Tool ATC, Bed size 1370mm x 680mm - Travels X axis 1250mm, Y axis 600mm, Z axis 900mm, Spindle Speed 8000rpm, Spindle Taper BT 50, Swarf Conveyor and Coolant System, Fanuc AC Spindle Servo Motors/Drives A20B-1004-0540/02A, A20B-1001-0770-04B, A20B-1000-0560/13F, S/No. 7041 A01 95 0108 (1995)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 8: Wasino LJ-62 CNC Lathe
Wasino LJ-62 CNC Lathe with Fanuc System 10T Control, 10" 3 Jaw Chuck, Tailstock, Collet Chuck and Collets, 12 Station Turret, Swarf Conveyor, Tooling. S/No. 182 (06/1985)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.