2638 - Without Reserve - Machine Tools, Lathes, Welding, Inspection Equipment, Tooling and Ancillaries previously used by IMI CCI, Sweden
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These Items are located in Saffle, Sweden. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
The currency will be Swedish Krona.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 25.00%.'
Temps de consultation
Viewing will be available with the auctioneer by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange an appointment.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 70
Lot 4: SMT Swedturn ST500 CNC Lathe
SMT Swedturn ST500 CNC Lathe with Siemens Control, Swarf Management System, 36 Station Tool Changer, Swarf Conveyor, Tailstock, (2) 3-point Steady's (1) Hydraulic, (1) Steady. S/No. 596213 (2001)
Please Note: This lot is located in Saffle, Sweden. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 7: SMT Swedturn ST500 CNC300 CNC Lathe
SMT Swedturn ST500 CNC300 CNC Lathe with CC4100 Control, Twin
Turret 10 Station Tool Changers, 500mm 3 Jaw Chuck, Tailstock,
Swarf Conveyor, Tooleye. S/No. 37-596017-03
Please Note: This lot is located in Saffle,
Sweden. Unfortunately, there are no loading facilities
available on site. Dismantling & Loading will be at the cost of
the purchaser.
Lot 8: SMT Swedturn ST300 CNC Lathe
SMT Swedturn ST300 CNC Lathe with CC4100 Control, Twin Turret,
12 Station Tool Changers, 6 Station Tool Changers, Swarf Conveyor.
S/No. 586-007
Please Note: This lot is located in Saffle,
Sweden. Unfortunately, there are no loading facilities
available on site. Dismantling & Loading will be at the cost of
the purchaser.
Lot 9: AB Korners MEK Verkstad Borrautomat 4 Head Drilling and Turning Machine
AB Korners MEK Verkstad Borrautomat 4 Head Drilling and Turning
Machine, Swarf Conveyor, 630mm 3 Jaw Chuck with various Face
Plates, Knoll Coolant System. S/No. 118305 (2003)
Please Note: This lot is located in Saffle,
Sweden. Unfortunately, there are no loading facilities
available on site. Dismantling & Loading will be at the cost of
the purchaser.
Lot 14: Storebro SB355-N Lathe
Storebro SB355-N Lathe, 1.6m distance between Centres, 460mm 3
Jaw Chuck, 800mm Swing, Quick Change Tooling and (3) Facing Plates,
Heidenhain Dro, 500mm 4 Jaw Chuck, 3 Point Steady
Please Note: This lot is located in Saffle,
Sweden. Unfortunately, there are no loading facilities
available on site. Dismantling & Loading will be at the cost of
the purchaser.
Lot 17: Koping S10C Lathe
Koping S10C Lathe, 300mm 3 Jaw Chuck, 1500mm distance between
Centres, 400mm 4 Jaw Chuck, 400mm Face Plate, (2) 3 Point Steady’s
, Quick Change Tooling, 560mm Swing. S/No. 19657
Please Note: This lot is located in Saffle, Sweden.
Unfortunately, there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Lot 24: Invema Radial Drill 1600mm
Invema Radial Drill 1600mm, Swivel Adjustable Box Table 550mm x
700mm, Machine Vice. S/No. 2010B1
Please Note: This lot is located in Saffle,
Sweden. Unfortunately, there are no loading facilities
available on site. Dismantling & Loading will be at the cost of
the purchaser.
Lot 41: Kalle Metal Chop Saw
Kalle Metal Chop Saw. S/No. 96
Please Note: This lot is located in Saffle,
Sweden. Unfortunately, there are no loading facilities
available on site. Dismantling & Loading will be at the cost of
the purchaser.
Lot 55: ASEA 260mm Double Ended Grinder
ASEA 260mm Double Ended Grinder
Please Note: This lot is located in Saffle,
Sweden. Unfortunately, there are no loading facilities
available on site. Dismantling & Loading will be at the cost of
the purchaser.
Lot 63: Mobile Tipping Skip
Mobile Tipping Skip 1500mm x 850mm x 1m High Approx
Please Note: This lot is located in Saffle, Sweden. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.