2619 - Copper Tube Manufacturing Equipment no longer required by KME Germany GmbH & Co KG
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a brochure for this equipment
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 19.00%.'
Temps de consultation
Viewing will be available by appointment only with the
Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or
email: info@cottandco.com
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all German export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 71
Lot 3H: Tooling for Piercing Mill
Tooling for Pierching Mill
Please Note: This Item is located in Germany, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 3J: Arbus 1 Ton Jib Crane with Demag Hoist
Arbus 1 Ton Jib Crane with Demag Hoist
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 4: Spares for LOI Billet Furnace
Spares for LOI Billet Furnace
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 5: Spares for Piercing Mill
Spares for Piercing Mill
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot *: Combination of Lots 6, 6A, 6B & 6C
Combination of Lots 6, 6A, 6B & 6C
Lot 6 - SMS/MEER/ Cold Pilger Rolling Mill, (3) x 115 VMR, number of Billets (3), Continuous Chain, Shell Transportation System with Feeding Table, Strokes 90 maximum – 85 per minute actual, Feed Rate 15.8 / 14.1mm Stroke, Shell Length 14,000mm Max, 8000 Minimum, Shell Dia Outer 115m Inner 89mm, Shell Weight 500KG, Exit Material: Tube Dia Outer 58mm Inner 53.2mm, Max Tube Eccentricity: % + - 2, Main Electric DC Motor 950KW 800 RPM with Controls, Reserve Main Clutch, Kind & Co/ Century Calibrating Roller 610mm dia x 220mm width, Tools Calibrating Roller Material. No. TQ1/1.2344, Calibrating Roller Hardness (HRc), Chrome Plate Mandrels – Material 1.2363, Thickness 0.003mm Hardness (HRc) ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
6 | SMS/MEER/ Cold Pilger Rolling Mill |
6A | Tooling for Pilger Rolling Mill |
6B | Spares |
6C | Die Polishing Machines |
Lot 6: SMS/MEER/ Cold Pilger Rolling Mill
SMS/MEER/ Cold Pilger Rolling Mill, (3) x 115 VMR, number of Billets (3), Continuous Chain, Shell Transportation System with Feeding Table, Strokes 90 maximum – 85 per minute actual, Feed Rate 15.8 / 14.1mm Stroke, Shell Length 14,000mm Max, 8000 Minimum, Shell Dia Outer 115m Inner 89mm, Shell Weight 500KG, Exit Material: Tube Dia Outer 58mm Inner 53.2mm, Max Tube Eccentricity: % + - 2, Main Electric DC Motor 950KW 800 RPM with Controls, Reserve Main Clutch, Kind & Co/ Century Calibrating Roller 610mm dia x 220mm width, Tools Calibrating Roller Material. No. TQ1/1.2344, Calibrating Roller Hardness (HRc), Chrome Plate Mandrels – Material 1.2363, Thickness 0.003mm Hardness (HRc) 54-56 Pushing Device, Push Rods x 4, Noise ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 6A: Tooling for Pilger Rolling Mill
Tooling for Pilger Rolling Mill
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 6B: Spares
Spares
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 6C: Die Polishing Machines
Die Polishing Machines
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 7*: Marshall Richard Pre-Draw Spinner Block MR 1
Marshall Richard Pre-Draw Spinner Block MR 1, Circular Sawing Unit from Pilger Tubes Transportation and Storage Area, Direction of Rotation - Right Clockwise, Block Dia 2134, Maximum Tube Inlet Dia 58mm, Maximum Wall Thickness 2.4mm, Minimum Tube Oulet Dia 6mm x 1mm Wall Thickness, Maximum Carriage Force 12 Ton, Pulling Speed 750 m/min, Basket Circulation System with Dual Basket Lifting Devices, (4) - Tube Transport Baskets, Dancers, Crimping/Machine Pointing, Pre-Straightner Control, Spinner Block, Discharge Table 1500kg Capacity, Electrical Control, Lubrication System and Transformer (1978) (Modifications 1998 Controls, 2003 Drum)
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities ...