2619 - Copper Tube Manufacturing Equipment no longer required by KME Germany GmbH & Co KG
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a brochure for this equipment
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 19.00%.'
Temps de consultation
Viewing will be available by appointment only with the
Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or
email: info@cottandco.com
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all German export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 71
Lot 1K: Product Stacker with Guiding Rolls, Logomatic 804 Labeller with OP7 Simatic Siemens Control, Swarf Tak off
Product Stacker with Guiding Rolls, Logomatic 804 Labeller with OP7 Simatic Siemens Control, Swarf Tak off. S/No. 2020184
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1L: LHR Filter Type DFV2 1-1.012 Dust Extraction System
LHR Filter Type DFV2 1-1.012 Dust Extraction System S/No. 845 900 with Siemens Control
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2*: Combination Lots of 2 & 2A
Combination Lots of 2 & 2A
Firbimatic Degreasing Unit – Working Degreasing Chamber, Reserve Heating, Steam Generator and Refrigerating Plant, Max Coil Weight 2.5t, Max Coil Diameter 750mm, Min Pipe Diameter 12mm, Max Pipe Diameter 54mm, Min Pipe Length 3m, Max Pipe Length 7.5m, Cycle Time approx. 30 min, Operating Voltage 400(V), Connected Load 180kw 185 A, Amount of Solvent 13,000 litres (2005)
and
Spares for Degreasing Unit
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 2 | Firbimatic Degreasing Unit – Working Degreasing Chamber |
| 2A | Spares for Degreasing Unit |
Lot 2: Firbimatic Degreasing Unit – Working Degreasing Chamber
Firbimatic Degreasing Unit – Working Degreasing Chamber, Reserve Heating, Steam Generator and Refrigerating Plant, Max Coil Weight 2.5t, Max Coil Diameter 750mm, Min Pipe Diameter 12mm, Max Pipe Diameter 54mm, Min Pipe Length 3m, Max Pipe Length 7.5m, Cycle Time approx. 30 min, Operating Voltage 400(V), Connected Load 180kw 185 A, Amount of Solvent 13,000 litres (2005)
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2A: Spares for Degreasing Unit
Spares for Degreasing Unit
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3*: Combination of Lots 3A - 3J
Combination of Lots 3A - 3J
Innse Rotary Piercing Mill with
Innse Continuous Billet Feeding System with Bridge Crane,
Brocker Straightening Unit, Controls and Electrical Cabinets
Ludwig OFAG Indugas Gas Heated Charging & Discharging
Billet Furnace, Heat Exchanger
Siemens Main Electric Motor, Gearbox and Transmission System,
Innse Billet Pusher, Milling, Water Cooling, Filtration and
Treatment, Controls and Electrical Cabinets.
Chain Take off Unit with Roll Away Device, Controls and
Electrical Cabinets, Schlak Type SRT-OST Cut off Saw. S/No. 32600
(2012), Schlak Type SRT-EST Cut Off Saw and Siemens Multipanel
Touch Screen.
Tooling for Pierching Mill
Arbus 1 Ton Jib Crane with Demag Hoist
Please Note: These Items are located ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3A: Innse Continuous Billet Feeding System with Bridge Crane, Brocker Straightening Unit, Controls and Electrical Cabinets
Innse Continuous Billet Feeding System with Bridge Crane, Brocker Straightening Unit, Controls and Electrical Cabinets
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3B: Ludwig OFAG Indugas Gas Heated Charging & Discharging Billet Furnace, Heat Exchanger
Ludwig OFAG Indugas Gas Heated Charging & Discharging Billet Furnace, Heat Exchanger
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3C: Innse Rotary Piercing Mill with Siemens Main Electric Motor
Innse Rotary Piercing Mill with Siemens Main Electric Motor, Gearbox and Transmission System, Innse Billet Pusher, Milling, Water Cooling, Filtration and Treatment, Controls and Electrical Cabinets
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3D: Chain Take off Unit with Roll Away Device, Controls and Electrical Cabinets
Chain Take off Unit with Roll Away Device, Controls and Electrical Cabinets
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
and
Schlak Type SRT-OST Cut off Saw. S/No. 32600 (2012)
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a specification sheet for this equipment
Schlak Type SRT-EST Cut Off Saw.
Please Note: This Item is located in Germany. Unfortunately there are no loading facilities ...