Doosan Z290MSY 8-Axis Twin Spindle, Twin Turret Multi Axis Milling/Turning Centre with Fanuc 18i-TB Control, Max. Swing: 490mm, Max. Turning Diameter: 290mm, 550mm Machining Length, 65mm Bar Capacity, Main Spindle: 4000rpm with C-Axis, Sub-spindle: 4500rpm with C-Axis, Y Axis = 80mm, (2) 12-Station Turrets with Driven Tools, Standard & Driven Tools, Iemca Kid70 Magazine Barfeed, Toolsetter & Swarf Conveyor. S/No. LXH1019 (2003)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Mazak Integrex 40 ATC 3-Axis CNC Lathe with Mazatrol T32-3 Control, Max. Diameter Bar Capacity: 3.45”, Max. Swing over Bed: 22.04”, Max. Turning Diameter (Chucking/Shaft): 22.04”/15.75”, Distance between Centres: 81.1”, Spindle Motor: 40/30 HP AC, Spindle Speed: 5 -3000rpm, Spindle Bore: 4.09”, Spindle Nose: A2-11, 120-ATC, X = 24.2”, Y = 7.87”, Z = 83.54”, C Axis Index: .001 degrees, Max. Tool Diameter: 3.54”/4.72”, Max. Tool Length: 11.8”, Max. Tool Weight: 22lbs, MT5 Tailstock Taper (1990)

Please Note: Tooling shown in the photographs are not included with the lot – the only items included are the Back End Spindle pieces.

Please Note: This Item is located in Birmingham and will be loaded free of charge to suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Biglia B42S Quattro Twin Spindle, Twin Turret Multi Axis CNC Lathe with GE Fanuc Series O-TT Control, Crawford DCD Collet Chuck to Main Spindle, Bellegrandi 42-B-3 Collet Chuck to Sub-spindle, 12-Station VDI 30 Top & Bottom Turrets, Parts Catcher, Swarf Conveyor, LNS Quick Load Short Magazine Barfeed. S/No. 4578 (1996)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Nakamura TW20 Multi-Axis CNC Milling/Turning Centre with Fanuc OTB Control, (2) Spindles with ‘C’ Axis, (2) 12-Station Turrets with Live Tooling Facility, Collet Chuck to Left Hand Spindle, 170mm 3-Jaw Chuck to Right Hand Spindle, Swarf Conveyor, Bar Capacity: 51mm, Max. Nominal Turning Diameter: 215mm. S/No. 21511

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Colchester Tornado 300 CNC Lathe with Fanuc OT Control, Crawford CDC 80 Collet Chuck & Collets, 12-Station VDI 40-Turret Tailstock, Parts Catcher, Multifeed ML1 Short Magazine Barfeed, 4000rpm Spindle Speed, Max. Turning Diameter: 300mm, Max.Turning Length: 500mm, Bar Capacity: 77/80mm. S/No. C30228 (1997)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Gildemeister Sprint 32 Linear Twin Spindle, 6 & 2 Axis Turning Centre with Fanuc Series 160i-B Control, Max. Turning Diameter: 33mm, Max. Turning Length: 120mm, C and Y Axis to left & right hand spindles, 8,000rpm max. Spindle Speed to both Spindles, (3) Driven Tool Positions to left hand Spindle, Driven Tool Facility to Right Hand Spindle, Parts Catcher, High Pressure Coolant, Swarf Conveyor & Iemca Boss Magazine Barfeed. S/No. 2301-0101 (2003)

Location: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Star Model Star SR-20 5-Axis Sliding Head CNC Lathe with Fanuc 16-T Control, Max. Turning Diameter: 200mm, Headstock Stroke: 205mm, Main Spindle Speed: 400 – 800rpm, 1 Degree Indexing, Sub-spindle, 225 – 4,500rpm 1 degree Indexing, Parts Catcher Conveyor, Swarf Conveyor, FMB Turbo 3-26 Magazine Bar Feed. S/No. 010935 (1997)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Hitachi Seiki HG400 II Twin Pallet Horizontal Machining Centre with (2) 400 x 400mm Pallets, 40 Taper Spindle, 90-Station ATC, FSE Swarf Management System. S/No. H-9411095 (1994)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Hurco VMX30 Vertical Machining Centre with Hurco Ultimax Twin Screen Control, Table Size: 1016 x 508mm, X = 760mm, Y = 500mm, Z = 600mm, 24-ATC. S/No. M342-06108011AHA (2000)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Hurco BMC30 HT/M Vertical Machining Centre with Hurco Ultimax 3 Control, Table Size: 1016 x 400mm, X = 760mm, Y = 450mm, Z = 600mm, 24-ATC. S/No. B3HM92101026A (1997)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Bridgeport VMC800/22 Vertical Machining Centre with Heidenhain 426 Control, 1000 x 490mm Table, X = 800mm, Y = 510mm, Z = 500mm, 22 ATC. S/No. 21057 (06/1996)

Location: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser