2141 - CNC Machining Centres & Lathes previously used by Atlas Hiflo, Bromford Industries & others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These items are located in Birmingham, Dudley, Gloucester and Leicester
Prime d'acheteur
'La prime d''acheteur sera fixée à 15.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing by Appointment only with the Auctioneer, Please contact our Office on : +44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 23
Lot 1: Gildemeister Sprint 42 Linear Twin Spindle, 6 & 2 Axis Turning Centre
Gildemeister Sprint 42 Linear Twin Spindle, 6 & 2 Axis Turning Centre with Fanuc Series 160i-B Control, Max. Turning Diameter: 42mm, Max. Turning Length: 120mm, C and Y Axis to left & right hand spindles, 6000rpm max. Spindle to both Spindles, (4) Driven Tool Positions to Left Hand Spindle, Driven Tool Facility to Right Hand Spindle, Parts Catcher, High Pressure Coolant, Swarf Conveyor & Iemca Boss Magazine Barfeed. S/No. 2601-0148 (2005)
Location: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 2: Gildemeister Sprint 32 Linear Twin Spindle, 6 & 2 Axis Turning Centre
Gildemeister Sprint 32 Linear Twin Spindle, 6 & 2 Axis Turning Centre with Fanuc Series 160i-B Control, Max. Turning Diameter: 33mm, Max. Turning Length: 120mm, C and Y Axis to left & right hand spindles, 8,000rpm max. Spindle Speed to both Spindles, (3) Driven Tool Positions to left hand Spindle, Driven Tool Facility to Right Hand Spindle, Parts Catcher, High Pressure Coolant, Swarf Conveyor & Iemca Boss Magazine Barfeed. S/No. 2301-0146 (2003)
Location: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 3: Traub TNM 28 Multi Slide CNC Automatic Lathe
Traub TNM 28 Multi Slide CNC Automatic Lathe with TX8H Control, 4-Head Mounted Slides, 8-Station Turret with Driven Tool Facility, Back End Working Pick Up Unit, Swarf Conveyor, ACS Extractor, Magazine Barfeed, Max Bar Size: 28mm, Max. Turning Length (Turret): 200mm. S/No. 209 (1996)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 4: Traub TNL 12/7 Sliding CNC Lathe
Traub TNL 12/7 Sliding CNC Lathe with System TX8i Control, Twin Turrets to Main Spindle with Live Tooling Facility, Sub-spindle, LNS Trython SST5 Multi Tube Barfeed, ACS Filter Unit, Max. Bar Diameter: 12.7mm, Max. Turning Length (Fixed Guide Bush): 140mm with Rotating Guide Bush: 75mm. S/No. 110 (1998)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 5: Mazak Multiplex 620 Twin Spindle 6-Axis Turning Centre
Mazak Multiplex 620 Twin Spindle 6-Axis Turning Centre with Mazatrol T32-6 Control, Max. Turning Diameter: 390mm, Standard Turning Diameter: 210mm, Max. Turning Length: 439mm, (2) ‘C’Axis (0.001 deg), 52mm Bar Capacity, (2) 12-Station Turrets with Driven Tools, Max. Spindle Speed: 4000rpm, Max. Driven Tool Speed: 3000rpm with Toolholders, Coolant System & Swarf Conveyor. S/No. 112028 (1994)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 6: Victor V-Turn 26M ‘C’ Axis CNC Lathe
Victor V-Turn 26M ‘C’ Axis CNC Lathe with Fanuc OT Control, 250mm 3-Jaw Chuck, 12-Station Turret, Live Tooling Facility, Tooleye, Tailstock, Swarf Conveyor, Max. Turning Diameter: 380mm, Z-Axis Travel: 1090mm, 75mm through Draw Tube. S/No. UA-1415 (1995)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 7: Victor V-Turn 26M 'C' Axis CNC Lathe
Victor V-Turn 26M 'C' Axis CNC Lathe with Fanuc OT Control, 250mm 3-Jaw Chuck, 12-Station Turret with Live Tooling Facility, Tooleye, Tailstock, Swarf Conveyor, Max. Turning Diameter: 380mm, Z-Axis Travel: 1090mm, 75mm through Draw Tube. S/No. UA1480 (1996)
Please Note: This Item is located in Leicestershire
Lot 8: Yang ML25A CNC Lathe
Yang ML25A CNC Lathe with Fanuc OT Control, 250mm 3 Jaw Chud, 12-Station Turret, Tailstock, Swarf Conveyor. S/No. E10107 (1993)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 9: Okuma & Howa Act 3, CNC Lathe
Okuma & Howa Act 3, CNC Lathe with Fanuc ISTF Control, 250mm 3 Jaw Chuck, 12-Station ATC, Tool Eye, Tailstock, Swarf Conveyor
Please Note: This Item is located in Dudley, West Midlands.
Lot 10: Yam CK2 CNC Lathe
Yam CK2 CNC Lathe with Fanuc IOT Control, 210mm 3 Jaw Chuck, 12-Station ATC, Tailstock, Swarf Conveyor. S/No. E67032 (1987)
Please Note: This Item is located in Birmingham and will be
loaded free of charge to a suitable vehicle. Blocking and securing
of the equipment however, will be at the cost and responsibility of
the purchaser