3180 - CNC Lathes, Machining Centres, Bridge Type and Plano Milling Machines, Thread Rolling, Fabrication and Toolroom Machinery Formerly Used By Ham Baker Group
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: Risk Assessments & Method Statements (RAMS) are a mandatory site requirement and should be submitted and approved prior to goods being dismantled/collected.
Please Note: These lots are located in Stoke-on-Trent, Staffordshire, UK. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 41-50 de 108
Lot 8A: Bed 6560mm x 2550mm
Bed 6560mm x 2550mm
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8B: Right Angle Milling Head as used on Noble and Lund Mill
Right Angle Milling Head as used on Noble and Lund Mill
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8C: Right Angle Milling Head as used on Noble and Lund Mill
Right Angle Milling Head as used on Noble and Lund Mill
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8D: Qty of 50 International Tooling with Cupboard
Qty of 50 International Tooling with Cupboard
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8E: Clamping Equipment
Clamping Equipment
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8F: Qty of 50 International Tooling with 10" 3 Jaw Chuck
Qty of 50 International Tooling with 10" 3 Jaw Chuck
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8G: (4) x Adjustable Clamps
(4) x Adjustable Clamps
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8H: (4) x Adjustable Clamps
(4) x Adjustable Clamps
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8i: Horizontal Milling Head (suitable for the Noble and Lund)
Horizontal Milling Head (suitable for the Noble and Lund)
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 8, 8B, 8C, 8D, 8E, 8F, 8G, 8H, 8i
Combination of Lots 8, 8B, 8C, 8D, 8E, 8F, 8G, 8H, 8i
Lot 8 - Noble and Lund Plano Bed Milling Machine with Acu-rite III 3 Axis Dro, Table Size 6560mm x 2550mm, ISO 50 Spindle Taper, Spindle Speeds 25 - 1150rpm, RDM Safety Foot Switch, Various ISO 50 Spindle Tooling.
Lot 8A - Bed 6560mm x 2550mm
Lot 8B - Right Angle Milling Head as used on Noble and Lund Mill
Lot 8C - Right Angle Milling Head as used on Noble and Lund Mill
Lot 8D - Qty of 50 International Tooling with Cupboard
Lot 8E - Clamping Equipment
Lot 8F - Qty of 50 International Tooling with 10" 3 Jaw Chuck
Lot 8G - (4) x Adjustable Clamps
Lot 8H - (4) x Adjustable Clamps
Lot 8i - Horizontal Milling Head (Suitable for the Noble and Lund)
Please Note: This lot is located ...