3098 - Taper Roller Bearing Manufacturing Facility surplus to the ongoing requirements of a World Leading Bearing Manufacturer
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Auction End Date: 12th May 2022 at 14.00 (BST) - 15.00 (CET)
Please visit our other auctions:
3098A - Malmedie Bearing Cold Headers, Toolroom Machinery & Equipment, Fork Lift Trucks, Racking
Please Note: These items are located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Virtual Tours
Auction Brochure
Please click here to view a Brochure for this Auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 41-50 de 64
Lot 34: Famir Mod 120 - 4 OD Grinder One Piece Flow
Famir Model 120-4 ASSI OD Grinder One Piece Flow with NUM plc Control, Balance System VM24 Wheel Balance Gauging, Marposs E9 Measurement Gauge, Automated Loading and Unloading with De-magnetiser, Electrical & Mechanical Upgrades 2000. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 35: Heald Model 1CF90 Bore Inner Grinder
Heald Model 1CF90 Bore Grinder (Bore/Race) One Piece Flow with Siemens Sinumerik 840 Control, Max outside diameter of Work 4 1/2" Min 7/8", Max Length of Work 2", Marposs E5 Measurement Gauge, Automated Loading and Unloading, Electrical & Mechanical Upgrades 2002. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 36: O.ERRE.PI Universal Honing Machine For OR and IR / TPE
O.ERRE.PI Universal Honing Machine For OR and IR / TPE with Siemens 0P7 Control. S/No. 71/2133/07. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Flanged Line (Nova) 3.93 - 11.81" (2.75 - 5.90mm)
Flanged Line (Nova) 3.93 - 11.81" (2.75 - 5.90mm)
Comprising of lots 37 & 38
Lot 37 - Nova Model VG150 PGE 10 - 150 Universal OD Grinder with NUM Flexium Control, Automated Loading and Unloading System, De-magnetiser, Internal Ring Dimensions D Max 150mm Min 50mm, B Max 50mm Min 20mm (see attached diagram) S/No. 32/1929/99. Electrical Upgrade 2020. CE Marked
Lot 38 - Grieshaber Twin Head Honing Machine, Manual Control, Automated Loading. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
37 | Nova Model VG150 PGE 10 - 150 Universal OD Grinder |
38 | Grieshaber Twin Head Honing Machine |
Lot 37: Nova Model VG150 PGE 10 - 150 Universal OD Grinder
Nova Model VG150 PGE 10 - 150 Universal OD Grinder with NUM Flexium Control, Automated Loading and Unloading System, De-magnetiser, Internal Ring Dimensions D Max 150mm Min 50mm, B Max 50mm Min 20mm (see attached diagram) S/No. 32/1929/99. Electrical Upgrade 2020. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 38: Grieshaber Twin Head Honing Machine
Grieshaber Twin Head Honing Machine, Manual Control, Automated Loading. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Anelli Interni Linea / Internal Ring Grinding Line 6 3.93 - 7.08" (100 - 180mm)
Anelli Interni Linea / Internal Ring Grinding Line 6 3.93 - 7.08" (100 - 180mm)
Comprising of lots 39, 40, 41, 42 & 43
Lot 39 - Famir Model RTF-DI 180/180mm CP CNC O D Grinder One Piece Flow. S/No. 2084 Min Dia Ring 50mm, Max 180mm, Max Thickness 60mm, Cutting Speed 60m/sec with Logan plc Control, Automated Loading and Unloading. No CE Mark
Lot 40 - Famir Model RTF-DI 180/180mm CS1/CNC Rib Grinder One Piece Flow. S/No. 2085 Min Dia Ring 50mm, Max 180mm, Min Thickness 60mm, Cutting Speed 60/sec with Logan plc Control, Automated Loading and Unloading with De-magnetiser. No CE Mark
Lot 41 - Famir Model RTF-D1 180/180 CNC 1D Grinder One Piece Flow. S/No. 2089 Min Dia Ring 50mm, Max 180mm, Max Thickness 60mm, Cutting ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 39: Famir Model RTF-DI 180/180mm CP CNC O D Grinder
Famir Model RTF-DI 180/180mm CP CNC O D Grinder One Piece Flow. S/No. 2084 Min Dia Ring 50mm, Max 180mm, Max Thickness 60mm, Cutting Speed 60m/sec with Logan plc Control, Automated Loading and Unloading. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 6 3.93 - 7.08" (100 - 180mm)
Lot 40: Famir Model RTF-DI 180/180mm CS1/CNC Rib Grinder
Famir Model RTF-DI 180/180mm CS1/CNC Rib Grinder One Piece Flow. S/No. 2085 Min Dia Ring 50mm, Max 180mm, Min Thickness 60mm, Cutting Speed 60/sec with Logan plc Control, Automated Loading and Unloading with De-magnetiser. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 6 3.93 - 7.08" (100 - 180mm)
Lot 41: Famir Model RTF-D1 180/180 CNC 1D Grinder
Famir Model RTF-D1 180/180 CNC 1D Grinder One Piece Flow. S/No. 2089 Min Dia Ring 50mm, Max 180mm, Max Thickness 60mm, Cutting Speed 60m/sec with CNC Siemens 840 Sinumerik Control, Marposs P3 ME Measurement Gauge, Automated Loading and Unloading with Demagnetiser. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 6 3.93 - 7.08" (100 - 180mm)