3069 - Phase 2 Fagima Machining Centre, ZPS ZLIN and Comev Picodue Lathes, Secmu Mill
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These items are located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: There is a strict clearance date of 23rd December 2021.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 74
Lot *: Combination of lots 20, 20A & 20B
Lot 20 - Fagima Fast 400 3-Axis Vertical Machining Centre with Heidenhain Control, Remote Handwheel, ISO 40 Din 10,000rpm Spindle, Table: 4,000 x 500 x 600mm. S/No. 485-04 (2004). Country of Origin: Italy
and
Lot 20A - (4) x Magnetic Chucks - 600 x 320mm. Country of Origin: Italy
and
Lot 20B - Rack with Qty of Tooling. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 20 | Fagima Fast 400 3-Axis Vertical Machining Centre |
| 20A | (4) x Magnetic Chucks - 600 x 320mm |
| 20B | Rack with Qty of Tooling |
Lot 30: Comev Picodue 260 x 2000 CNC Teach Lathe
Comev Picodue 260 x 2000 CNC Teach Lathe with D Electron Control, 8-Station Automatic Turret, Manual Tailstock, Mario Pinto 315mm 3-Jaw Self-Centering Chuck, Centre Height: 260mm, diam. Swing 520mm. S/No. 7312 (2005). Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 30A: SMW-Lunette Autoblok SLU-31-MS Hydraulic Steady
SMW-Lunette Autoblok SLU-31-MS Hydraulic Steady. Country of Origin: Germany
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 30 & 30A
Lot 30 - Comev Picodue 260 x 2000 CNC Teach Lathe with D Electron Control, 8-Station Automatic Turret, Manual Tailstock, Mario Pinto 315mm 3-Jaw Self-Centering Chuck, Centre Height: 260mm, diam. Swing 520mm. S/No. 7312 (2005). Country of Origin: Italy
and
Lot 30A - SMW-Lunette Autoblok SLU-31-MS Hydraulic Steady. Country of Origin: Germany
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 30 | Comev Picodue 260 x 2000 CNC Teach Lathe |
| 30A | SMW-Lunette Autoblok SLU-31-MS Hydraulic Steady |
Lot 36: 3-Shelved Tooling Trolley
3-Shelved Tooling Trolley; 95mm h x 53mm x 102mm. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 41: 3-Shelved Tooling Trolley
3-Shelved Tooling Trolley; 95mm h x 53mm x 102mm. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 46: 3-Shelved Tooling Trolley
3-Shelved Tooling Trolley; 95mm h x 53mm x 102m. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 51: Comec 3-Shelved Tooling Trolley
Comec 3-Shelved Tooling Trolley. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 55: Takisawa EX-110 Cell Mate Serie 2-Axis CNC Lathe
Takisawa EX-110 Cell Mate Serie 2-Axis CNC Lathe with Fanuc 21i-TB Control, PCMCIA & RS232 Ports, 10-Position Turret, Kitagawa 250mm 3-Jaw Self-Centering Chuck, Hydraulic Tailstock, Distance between Centres: 600mm, Presetting Tool, Swarf Conveyor. S/No. CH10E11174 (2007). Country of Origin: Taiwan
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 56: Fermec Tool Trolley with Compartments & Drawers
Fermec Tool Trolley with Compartments & Drawers. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.