2880 - CNC Horizontal and Vertical Machining Centres, CNC Lathes & Surface Grinder by Bridgeport, Cincinnati, DMG, Doosan, HAAS, Hardinge, Hurco, Matchmaker, Mori Seiki, Mazak, Okamoto & Supermax
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These Items are located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 23
Los 1: DMG Mori Seiki NHX4000 Twin Pallet Horizontal Machining Centre
DMG Mori Seiki NHX4000 Twin Pallet Horizontal Machining Centre with Siemens 840D Slimline 3D CNC Control, Pallet Size: 400 x 400mm, X Traverse: 560mm, Y Traverse: 560mm, Z Traverse: 660mm, B Axis 360,000 Degrees, Spindle Speeds: 0 – 12,000rpm, Spindle Taper: SK40, Flood Coolant, Rigid Tapping, Swarf Conveyor, Swarf Management System, Spindle Motor 15/11kw, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 2700 x 4200 x 2750mm, Approximate Weight 7600kg. S/No.1220 000057-3 2813243 (2012)
Please Note: Fixtures are not included
Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser
Los 2: Mazak FH5800 Horizontal Machining Centre
Mazak FH5800 Horizontal Machining Centre with Mazatrol 640M Fusion Control , 1 degree increment B-Axis, 120-Station ATC, Renishaw Measuring Probe, Renishaw Spindle Probe, Camera and Screen, Qty of Tool Holders, (2) Tombstones. S/No. 155849 (2001)
Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser
Los 3: Mori Seiki Hitech HS500 CNC Twin Pallet Horizontal Machining Centre
Mori Seiki Hitech HS500 CNC Twin Pallet Horizontal Machining Centre with Seicos e16m Fanuc 16 Control, Full B-Axis, Pallet Size: 500 x 500mm, Travels: 680 x 680 x 680mm, 120-Station ATC, BT40, 12,000rpm, 22/25kw, Qty BT40 Toolholders, Spare Pallets & Tombstones. S/No. HS50306 (2001)
Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser
Los 4: YCM Supermax V158B Machining Centre
YCM Supermax V158B Machining Centre with Heidenhain TNC 410 Control, Table Size: 1700mm x 860mm, 24-Station ATC, Spindle Speed: 6,000rpm, Travel X = 1500mm, Y = 860mm, Z = 720mm. Measurements; 4.5m Length, 3.2m High and 3.5m Width. S/No. 3010 96 (2003)
Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser
Los 5: HAAS VF3SS 5-Axis Vertical Machining Centre
HAAS VF3SS 5-Axis Vertical Machining Centre with Nikken Trunnion 5th Axis, Through Spindle Coolant, In Line Direct Drive Spindle, Spindle & Toolsetting Probes, 40-Station ATC, BT40, Table Size: 1219 x 457mm, Travels: 1016 x 508 x 635mm. S/No. 1072660 (2009)
Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser
Los 6: Mazak VCN410A-II Vertical Machining Centre
Mazak VCN410A-II Vertical Machining Centre with Mazak Matrix Nexus Control, Table Size: 900 x 410mm, Travels: 560 x 410 x 510mm, 12,000rpm, 30-Station ATC, CAT40, Table Probe, Swarf Conveyor. S/No. 207383 (2008)
Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser
Los 7: Supermax YCM FV56A APC Twin Pallet Vertical Machining Centre
Supermax YCM FV56A APC Twin Pallet Vertical Machining Centre with Heidenhain 530i Control, Pallet Size: 560 x 410mm, Movement: 560 x 410 x 450mm, Rapid: 36 m/min, Spindle Speed: 40-10,000 Rpm, Spindle Power: 7.5 kW, BT40 Spindle, 20-Position ATC, Swarf conveyor. S/No. 0666 (2005)
Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser
Los 8: Bridgeport VMC600P3 Vertical Machining Centre
Bridgeport VMC600P3 Vertical Machining Centre with Heidenhain TNC530i Control, Table Size: 750 x 510mm, Travels: 610 x 510 x 510mm, 8000rpm, 20-Station ATC, BT40. S/No. NVAA6D0058 (2006)
Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser
Los 9: Cincinnati Arrow-2 750 Vertical Machining Centre
Cincinnati Arrow-2 750 Vertical Machining Centre with Heidenhain 530I Control, Table Size: 950 x 520mm, X-Axis Travel: 760mm, Y-Axis Travel: 510mm, Z-Axis Travel: 510mm, Spindle nose to Table: 125 – 630mm, Table load capacity: 1,650 Lbs, Spindle Motor: 17 / 12 HP, Spindle Speed: 12,000rpm, Spindle Taper: CAT 40, Cutting Feed Rate: 590 IPM, Rapid Traverse Rate: 1180 IPM, 21-Station Toolchanger, Linear Scales, Remote Pulse Handle, Max. Tool Weight: 15 Lbs, Max. Tool Length: 15″, Coolant system. S/No. 7043-HoA-KE1815 (2003)
Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser
Los 10: Matchmaker 610 Mini Mill Vertical Machining Centre
Matchmaker 610 Mini Mill Vertical Machining Centre with Fanuc Oi-Mate MC Control, Table to Spindle: 150 – 630mm, Table Size: 700 x 308mm, Traverses XYZ: 610 x 305 x 460mm, Rapid Feed Rates XYZ: 20 x 20 x 18 m/minute, Spindle Power: 7.5kW, Spindle Speed: 8000rpm, 16-Station ATC, BT40. S/No. 61000938 (2007)
Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser