2823A - Hurco and Bridgeport Machining Centres, Bridgeport CNC Mills, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Worcester
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Cannock and Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 92
Los 100: Hurco VMX 30 Vertical Machining Centre
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 100A: Qty of CAT40 Tool Holders
Qty of CAT40 Tool Holders and Collets and Bench
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of Lots 100 & 100A
Combination of Lots 100 & 100A
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
and
Qty of CAT40 Tool Holders, Collets and Bench
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
100 | Hurco VMX 30 Vertical Machining Centre |
100A | Qty of CAT40 Tool Holders |
Los 101: Hurco VSX24 Vertical Machining Centre
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 101A: Qty of CAT40 Tool Holders and Collets
Qty of CAT40 Tool Holders and Collets
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of Lots 101 & 101A
Combination of Lots 101 & 101A
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
and
Qty of CAT40 Tool Holders and Collets
Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
101 | Hurco VSX24 Vertical Machining Centre |
101A | Qty of CAT40 Tool Holders and Collets |
Los 200: Hurco VM1 Machining Centre
Hurco VM1 Machining Centre with Hurco Max Control, 16 ATC, Table Size 760mm x 350mm, 6” Machine Vice, Qty of BT 40 Tooling. S/No. H-V11662 (2006)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 201: Bridgeport VMC 800/22 Digital Machining Centre
Bridgeport VMC 800/22 Digital Machining Centre with Heidenhain 4266 Control, Table size 1000mm x 490mm, 6" Machine Vice, Qty of BT40 Tool Holders. S/No. 721748 (1998)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 201A: Qty of BT40 Tool Holders & Collets
Qty of BT40 Tool Holders & Collets
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of Lots 201 & 201A
Combination of Lots 201 & 201A
Bridgeport VMC 800/22 Digital Machining Centre, with Heidenhain 4266 Control, Table size 1000mm x 490mm, 6" Machine Vice, Qty of BT40 Tool Holders. S/No. 721748 (1998)
and
Qty of BT40 Tool Holders & Collets
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
201 | Bridgeport VMC 800/22 Digital Machining Centre |
201A | Qty of BT40 Tool Holders & Collets |