2814 - Doosan Puma, Daewoo, Leadwell Lathes and Machining Centres, Mills, Drills and Grinders no longer required by Omal Srl Italy
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Banzi PZ, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com or our Italian Office on: + 39 0732 677063 info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 41-50 von 107
Los 121A: Qty of Saw Blades
Qty of Saw Blades
Please Note: This lot is located in Italy. Unfortunately,
there are no loading facilities on-site, dismantling and loading
will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los *: Combination of Lots 121 & 121A
Combination of Lots 121 & 121A
121- IMET Vertical Bandsaw with 45 Degree Angle. S/No. 022880001 (2002)
and
121A - Qty of Saw Blades
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier| Losnummer | Beschreibung |
|---|---|
| 121 | IMET Vertical Bandsaw |
| 121A | Qty of Saw Blades |
Los 122: Friggi Vertical Bandsaw
Friggi Vertical Bandsaw with 45 Degree Angle
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Los 123: Opus 350 Vertical Wood Bandsaw
Opus 350 Vertical Wood Bandsaw, Table Size 760mm x 600mm, Throat Size 550mm, Hydraulic Table. S/No. 348 (1999)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Los 124: Selco WU230 Mig Welder
Selco WU230 Mig Welder, Burning Torch with Trolley for Asesalene. S/No. 010040000036
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Los 125: OMCN 150 Ton Beam Hydraulic Press
OMCN 150 Ton Beam Hydraulic Press, Table Size 700mm x 570mm, Piston Size 135mm, Pressure 400 Bar. S/No. 07 (2000)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Los 126: Marpol 120mm Horizontal Belt Linisher
Marpol 120mm Horizontal Belt Linisher. S/No. 1237 (2007)
Please Note: This lot is located in Italy. Unfortunately,
there are no loading facilities on-site, dismantling and loading
will be at the cost of the purchaser.
Los 127: Femi 150mm Double Ended Grinder
Femi 150mm Double Ended Grinder. S/No. 8148431 and Femi 150mm
Double Ended Grinder with Bench. S/No. 8116431
Please Note: This lot is located in Italy. Unfortunately,
there are no loading facilities on-site, dismantling and loading
will be at the cost of the purchaser.
Los 128: Box of Carbide Tips
Box of Carbide Tips
Please Note: This lot is located in Italy. Unfortunately,
there are no loading facilities on-site, dismantling and loading
will be at the cost of the purchaser.
Los 129: Qty of U Drills
Qty of U Drills
Please Note: This lot is located in Italy. Unfortunately,
there are no loading facilities on-site, dismantling and loading
will be at the cost of the purchaser.