2772 - CNC Machining Centres, Lathes, Conventional and Toolroom Machinery no longer required by Midland Hydraulics and Others
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Alcester, Birmingham, Leicester, Skelmersdale and Tamworth.
Please see individual lots for loading information.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 84
Los 100: Mikron XSM800 CNC Vertical Machining Centre
Mikron XSM800 CNC Vertical Machining Centre
with Heidenhain 530i Control, 36,000rpm Step-tec
Spindle, 30 ATC, Swarf Management, Fume
Extractor, Chiller, X-Axis Stroke approx. 800mm. S/No.
107.76.00.018 (2009)
Please Note: This lot is located in Birmingham. A
dismantling and loading onto suitable vehicle charge of £250 will
be automatically added to your invoice should you be successful in
purchasing this item, blocking and securing will be at the cost of
the purchaser.
Los 100A: Agie Charmilles CUT 30 CNC Wire EDM
Agie Charmilles CUT 30 Submerged 5 Axis CNC Wire EDM with Auto Wire Thread, X, Y, Z 600 x 300 x 350mm, Maximum Workpiece dimensions, 25° Taper cut, AgieCharmilles Windows Based Control, AgieCharmilles Generator, Submerged Cutting to 350mm, Auto Wire Thread, Wire capacity 0.15 - 0.30mm, Hand Box Control, Four Side Clamping Frame.
Please Note: this lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Los 101: HAAS VF-2 Vertical Machining Centre
HAAS VF-2 Vertical Machining Centre Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle Speed 0 - 7500rpm, Spindle Taper BT40, Spindle Motor 20Hp HAAS Control, 20 Station ATC, Programmable Coolant Nozzle, Low Volt light (2004)
Please Note: there is no tooling or vice with the machine.
Please Note: This lot is located in Leicester. Dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Los 102: Cincinnati FADAL Model 4020HT VMC
Cincinnati FADAL Model 4020HT VMC Vertical Machining Centre (2006) Traverses XYZ: 1016 x 508 x 508mm, Table 1218 x 508mm, 10000rpm, 21 Station Toolchanger, BT40, Fanuc 18i-M control, coolant, low volt light. S/No. 012006018583
Please Note: This lot is located in Leicester. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Los 103: Cincinnati Milacron Dart 500 Vertical Machining Centre
Cincinnati Milacron Dart 500 Vertical Machining Centre with Cincinnati Acramatic A2100 Control, Table Size 700mm x 510mm, 20-Station Tool Changer, BT40 Tooling. S/No. 7053 A0A-RM-0065 (1997) with 6-Tool Holders, Excluding Vices.
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 103A: Hardinge VM 1000II Vertical Machining Centre
Hardinge VM 1000II Vertical Machining Centre with Sinumerik Control, Table Size:1120mm x 510mm, 20-ATC. S/No. NVCA2D0028 (2002)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Los 104: Hurco VM1 Vertical Machining Centre
Hurco VM1 Vertical Machining Centre with Hurco Max Control, Table Size: 760 x 355mm, 16-Station ATC. S/No. VM1 - 061 09053AE (05/2003) MFG No. H-V10242
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Los 105: Hurco VM1 Vertical Machining Centre
Hurco VM1 Vertical Machining Centre with Hurco Max Control, Table Size: 760x 355mm, 16-Station ATC. S/No. VM1-06108053AE (05/2003) MFG No. H-V10241
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Los 105A: HAAS TM1 CNC Toolroom Mill
HAAS TM1 CNC Toolroom Mill with HAAS Control (2005)
Location: This lot is located in Co. Durham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 106: Traub TNS 30/42D Lathe
Traub TNS 30/42D Lathe with Stamag DN42 Bar Feed, System TX-8-D Control. S/No. 880 (1989)
Please Note: This lot is located in Skelmersdale. Unfortunately there is no loading available but the machine will be dismantled and skated to door for loading.