2745 - Conventional & Toolroom Equipment no longer required due to the retirement of the Directors of L Williams Engineering
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: Clearance from 3rd – 17th January 2019
Please Note: These lots are located in Aylesbury, Bucks. Unfortuately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 17
Los 1: Bridgeport Series 1 2HP Milling Machine
Bridgeport Series 1 2HP Milling Machine, Variable Speed Head Variable Feeds and Rapid 2 Axis Heidenhain DRO Table 42” x 9” R8 Taper. S/No. 434351087X
Please Note: This lot is located in Aylesbury, Bucks. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 2: Huron NU3 Milling Machine
Huron NU3 Milling Machine Table Size 1.235mm x 460mm SA 40 Taper Heidenhain 3 Axis DRO 2000RPM Trav. X900Y700Z500. S/No.1585 (1971)
Please Note: This lot is located in Aylesbury, Bucks. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 3: Brierley Drill Grinder ZB 25
Brierley Drill Grinder ZB 25 capacity 1mm to 25mm, Single Phase.
Please Note: This lot is located in Aylesbury, Bucks. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 4: TOS FNK 25 Turret Milling Machine
TOS FNK 25 Turret Milling Machine Table Size 1250mm x 300mm, 40 Iso Taper Miniwizard 2 Axis DRO. S/No. 29498
Please Note: This lot is located in Aylesbury, Bucks. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 5: VDF Lathe Straight Bed
VDF Lathe Straight Bed 250mm C/H 1000mm, B/C Dickson Tool Post, 250mm, 3 Jaw Chuck 400mm, 4 Jaw Chuck 2 Axis Acurite DRO.
Please Note: This lot is located in Aylesbury, Bucks. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 6: Holbrook N13 Lathe
Holbrook N13 Lathe 6 .5” C/H X 24” B/C Quick Change Tool Post, 8” � � � 3 Jaw Chuck, 10” 4 Jaw Chuck 2000rpm Taper Turning.
Please Note: This lot is located in Aylesbury, Bucks. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 7: Eagle Hand Surface Grinder
Eagle Hand Surface Grinder 6” X 18” Mag Chuck
Please Note: This lot is located in Aylesbury, Bucks. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 8: Jones & Shipman 12” 300mm Rotary Table
Jones & Shipman 12” 300mm Rotary Table
Please Note: This lot is located in Aylesbury, Bucks. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 9: Plain Vice 8”
Plain Vice 8”
Please Note: This lot is located in Aylesbury, Bucks. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 10: Dividing Head with Tailstock 5” C/H
Dividing Head with Tailstock 5” C/H
Please Note: This lot is located in Aylesbury, Bucks. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.