2703 - Balancing Machines, CNC & Conventional Equipment no longer required due to restructuring and retirement at University Department, Electronic Balancing Services & W&W Engineering Ltd
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Please Note: The majority of these lots are located in Essex. Please see individual lots for loading information.
Lot Numbers: 9, 10 & 11 are located in Southend on Sea. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 1-10 z 103
Przedmiot 1: Schenck VE3 Balancing Machine
Schenck VE3 Balancing Machine with CAB 700 Control, Erlo all Geared Head Drilling Machine, Workpiece weight: 100kgs, Workpiece diameter: 810mm (2010)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Przedmiot 2: Schenck Nagahama 120 CBAD Balancing Machine
Schenck Nagahama 120 CBAD Balancing Machine with CAB 641 Control, Workpiece weight 15kgs, 350mm Workpiece diameter. S/No. 49-0001 (1998)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Przedmiot 3: Froude Consine Engine Dynamometer Dyno F24
Froude Consine Engine Dynamometer Dyno F24, un-used since being reconditioned by Froude, 1000bhp, 6000-9000rpm, Peak Torque 2700Nm with a load cell for torque measurement and speed pick up, S/No. DYNO1065 un-used since reconditioning by manufacturers
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Przedmiot 4: Gate Eclipse CNC Milling Machine
Gate Eclipse CNC Milling Machine with Anilam 5000M 3-Axis Control, Power Drawbar, R8, Table Size: 1067 x 230mm (2005)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Przedmiot 5: Gate PBM2000 Turret Mill
Gate PBM2000 Turret Mill, Table Size: 1067 x 230mm, R8, Digital Readout Interlocking Guards, Power Feeds on 2 Axis, Power Drawbar (2006)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Przedmiot 6: Gate 360E Gap Bed Lathe
Gate 360E Gap Bed Lathe with 2-Axis D.R.O, 360mm Swing, Gap Bed x 1000mm between Centres .82-1400rpm, 3 Jaw , 4 Jaw, Faceplate, Toolpost and Holders, Tools, Guarding (2006)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Przedmiot 7: Gate PBM1000 Turret Mill
Gate PBM1000 Turret Mill, Table Size: 1067 x 230mm, R8, Digital Readout Interlocking Guards, Power Feeds (2006)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Przedmiot 8: Gate PBM1000 Turret Mill
Gate PBM1000 Turret Mill, Table Size: 1067 x 230mm, R8, Digital Readout Interlocking Guards, Power Feeds (2006)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Przedmiot 9: Cincinnati Arrow 750 Vertical Machining Centre
Cincinnati Arrow 750 Vertical Machining Centre with Accramatic 2100 Control, Traverses: 762 x 510 x 510mm, 40 Taper, 60-6000rpm, Manuals, Collets and Tooling. S/No. 7043a00rd0651 (1996)
Please Note: This lot is located in Southend on Sea. Unfortunately there are no loading facilities available, blocking and securing will be at the cost of the purchaser.
Przedmiot 10: Cincinnati Falcon 200 CNC Lathe
Cincinnati Falcon 200 CNC Lathe with Accramatic 2100 Control, 200mm Chuck, Tailstock, 215mm -x .z 420mm, 12 position, 4500rpm, 67mm spindle, Tooling and Manuals S/No. 7048AOARM810 (1997)
Please Note: This lot is located in Southend on Sea. Unfortunately there are no loading facilities available, blocking and securing will be at the cost of the purchaser.