2629 - CNC & Conventional Toolroom Equipment no longer required due to the restructuring of CJ Engineering Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These Items are located in Tamworth and Burntwood. Please see individual lots for location and loading facilities.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 66
Lot 1: Dahlih MCV 1450 Vertical Machining Centre
Dahlih MCV 1450 Vertical Machining Centre with Fanuc Om Control Table Size 1600 X 800mm X Travel 1450mm Y Travel 750mm Z Travel 750mm, ATC 24 Tools. S/No.3001070155 (2004)
Please Note: This Lot is Located in Tamworth unfortunately there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Lot 2: Haas SL-20TCE CNC Lathe
Haas SL-20TCE CNC Lathe, S/No.70548 (2005)
Please Note: This Lot is Located in Tamworth unfortunately there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Lot 3: Hardinge Conquest CS 42 CNC Lathe
Hardinge Conquest CS 42 CNC Lathe, Fanuc ot Control, Collet Chuck, Tail Stock, Parts Catcher 10 Station Turret
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 4: Harrison Alpha 400 CNC Teach Lathe
Harrison Alpha 400 CNC Teach Lathe, 400mm X 1250mm Between Centres, Gap Bed, 3 & 4 Jaw Chucks, Fanuc Control, Quick Change Tool Post Plus Holders, 245mm Swing Over Cross Slide, 585mm Swing in Gap, 54mm Spindle Bore, S/No, A30239/082 (1996)
Please Note: This Lot is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser
Lot 5: Emco PC Turn 125 CNC Lathe
Emco PC Turn 125 CNC Lathe Fanuc 0T Control. S/No. A7V L5, 004 (1998)
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 6: Hydrafeed Bar Feed Model HY
Hydrafeed Bar Feed Model HY. S/No. 9444
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 7: Fanuc Robodrill CX-T10B CNC Drilling Machine
Fanuc Robodrill CX-T10B CNC Drilling Machine, Fanuc 16-M Control, Spindle: 8000 Rpm X: 500mm, Y: 380mm Z: 300mm (1995)
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 8: Churchill PH 400 Gear Hobber
Churchill PH 400 Gear Hobber, S/No. 13744-80-10
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 9: Nihon NDP-1 Kikai Gear Hobber
Nihon NDP-1 Kikai Gear Hobber, Hobbing Capacity, Max, Dia, (without support) = 460mm, Hobbing Capacity, Max, Dia, (with support) = 380mm, Max, Vertical Travel, Hob Saddle = 310mm, Max, Pitch Hobbing = M,P 5, Max Dia, of Hob = 115mm, Max, Length of Hob = 110mm, (1991)
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 10: Nihon Ndp-1 Kikai Gear Hobber
Nihon Ndp-1 Kikai Gear Hobber, Hobbing Capacity, Max, Dia, (without Support) = 460mm, Hobbing Capacity, Max, Dia, (with Support) = 380mm, Max, Vertical Travel, Hob Saddle = 310mm, Max, Pitch Hobbing = M,P 5, Max Dia, of Hob = 115mm, Max, Length Of Hob = 110mm, (1987)
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.