3305 - Last Remaining Items; 3 x Schumag Bright Bar Drawing Lines & 100t Aetna Standard Draw Bench and Processing Equipment due to frustrated Export
Engineering
Auktion beendet am
Verbleibende Zeit
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 82
Los * : Combination of lots 1A, 1B, 1C, 1D & 1E
100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling, Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector, Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Operator Control Panel, ...
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 1A: Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999)
Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 1B: 100 Ton Aetna Standard Bar Draw Bench
100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 1C: Missler Model DEB-540CE Bandsaw
Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Open Control Panel
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 1D: Scraven 100-Ton Anvil Bumper
Scraven 100-Ton Anvil Bumper with 13m Through-Feed Roller Table
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 1E: Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener
Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener for up to 4” Square, 7” Flat, 4” Hex, Main Motor 224 KW, 460 Volt, 1130 RPM; Individual Vertical Motorized Adjustment; Roll Centers Adjustable; with 10M Bundler Accumulator Table
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos * : Combination of lots 4A, 4B & 4C,
Schumag/Casa Grande IIBF, Flat Bar Drawing Line, 12mm – 30mm x 12-Ton Pull Capacity, including Casa Grande Double Decoiler, Casa Grande Entry Bar Manipulator. Milling Type Pointer, Horizontal/Vertical Pre Straightening, Vogel & Schumann 4-Wheel (35KW) Shot Blast, Schumag IIBF Flat Bar Drawing Machine; Motor-169Kw; Straightener, Second Stage After Draw Straightener, Casa Grande Flying Rotary Shear, Runout to Bar Transfer Conveyor, Associated Controls, Drives and Equipment
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
4A | Casa Grande Double Decoiler |
4B | Vogel & Schumann 4-Wheel (35KW) Shot Blast |
4C | Schumag IIBF Flat Bar Drawing Machine |
Los 4A: Casa Grande Double Decoiler
Casa Grande Double Decoiler, Casa Grande Entry Bar Manipulator, Milling Type Pointer, Horizontal/Vertical Pre Straightening
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 4B: Vogel & Schumann 4-Wheel (35KW) Shot Blast
Vogel & Schumann 4-Wheel (35KW) Shot Blast
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 4C: Schumag IIBF Flat Bar Drawing Machine
Schumag IIBF Flat Bar Drawing Machine; Motor-169Kw; Straightener, Crack Detector, Second Stage After Draw Straightener, Casa Grande Flying Rotary Shear, Runout to Bar Transfer Conveyor, Associated Controls, Drives and Equipment
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.