2615 - Quality Glass Cutting and Processing Equipment previously used by Cristalvetro, Ovada (AL) Italy
Glass
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer.
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 60
Lot 1: Intermac Type Master Bevel 2300 CNC Machining Centre
Intermac Type Master Bevel 2300 CNC Machining Centre. S/No. 90010 with OSAI Control Panel, Bed Size 3000mm x 2200mm with 21 Tools and Qty of Suction Cups (1999)
Please Note: This Item is located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1A: Qty of Suction Cups suitable for Intermac Machining Centres
Qty of Suction Cups suitable for Intermac Machining Centres
Please Note: This Item is located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1B: (2) Cupboards with Qty of Grinding Tools
(2) Cupboards with Qty of Grinding Tools
Please Note: This Item is located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1C: (1) Cupboard with Qty of Grinding Tools
(1) Cupboard with Qty of Grinding Tools
Please Note: This Item is located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 1 – 1C
Combination of Lots 1 – 1C
Intermac Type Master Bevel 2300 CNC Machining Centre S/No. 90010 with OSAI Control Panel, Bed Size 3000mm x 2200mm with 21 Tools and Qty of Suction Cups (1999)
and
Qty of Suction Cups suitable for Intermac Machining Centres
and
(2) Cupboards with Qty of Grinding Tools
and
(1) Cupboard with Qty of Grinding Tools
Please Note: These Items are located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2: Intermac Type Master Groove 1500 CNC Engraving Machine
Intermac Type Master Groove 1500 CNC Engraving Machine S/No. 96/155 with Control Panel, Bed Size 3000mm X 1750mm, Includes 13 tools (1997)
Please Note: This Item is located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 2A: (1) Cupboard with Qty of Tooling Suitable for Intermac Master Groove
(1) Cupboard with Qty of Tooling Suitable for Intermac Master Groove
Please Note: This Item is located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 2B: (1) Shelving including Qty of Tooling Suitable for Intermac Master Groove
(1) Shelving including Qty of Tooling Suitable for Intermac Master Groove
Please Note: This Item is located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 3: Bottero Model 352 BCS –R Classic Shape Cutting Tilting Table
Bottero Model 352 BCS –R Classic Shape Cutting Tilting Table, S/No. GG50SB – 18943 with Control Panel based on win 7 OS, Size of Table 4500mm x 3000mm (2010)
Please Note: This Item is located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 4: Bovone Type ELB 17-45 Horizontal Edger
Bovone Type ELB 17-45 Horizontal Edger with Variable Angle up 45 degrees and 17 spindles, S/No. 69252510 (1996)
Please Note: This Item is located in Ovada, (AL) Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.