2591 - High Quality CNC Doosan Vertical Machining Centres & Lathes and Conventional Toolroom Equipment previously used by George Taylor (Engineering) Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These Lots are located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a brochure for this auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer on Wednesday 7th June 2017.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Conditions spécifiques
Lots 1-9 de 9
Lot 104: Daewoo Puma 400B CNC Lathe
Daewoo Puma 400B CNC Lathe with Fanuc 32i Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye & Swarf Conveyor, Power on Time Hours: 8,317, Running Hours: 4,361, Cutting Hours: 3,267, 10 Station Turret. S/No. 4449 (2011) (9) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 105: Daewoo Puma 400B CNC Lathe
Daewoo Puma 400B CNC Lathe with Fanuc 21i-TB Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye, 530mm Chuck, Swarf Conveyor, Power on Time Hours: 12,246, Running Hours: 6,007, Cutting Hours: 4,395, 10 Station Turret. S/No. 2249 (2006) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
View photos for a copy of the original Purchase Invoice.
Lot 106: Daewoo Puma 400LB CNC Lathe
Daewoo Puma 400LB CNC Lathe with Fanuc 18-iT Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 2100mm between Centres, Tooleye, Swarf Conveyor & 450mm Chuck, Power on Time Hours: 24,306, Running Hours: 7,709, Cutting Hours: 7,466, 20 Station Turret. S/No. 1100 (2001) (8) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
View photos for a copy of the original Purchase Invoice.
Lot 107: Daewoo Puma 2600L CNC Lathe
Daewoo Puma 2600L CNC Lathe with Fanuc i Series Control, Swing over Bed: 630mm, Swing over Saddle: 500mm, 1500mm between Centres, 12" Chuck, Tooleye & Parts Catcher, Power on Time Hours: 3,548, Running Hours: 1,700, Cutting Hours: 875, 12 Station Turret. S/No. 374 (2013)
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
View photos for a copy of the original Purchase Invoice.
Lot 108: Daewoo Puma 280 CNC Lathe
Daewoo Puma 280 CNC Lathe with Fanuc 21-TB Control, Swing over Bed: 630mm, Swing over Saddle: 500mm, 630mm between Centres, 12" Chuck, Tooleye, Parts Catcher, Power on Time Hours: 17,939, Running Hours: 6,514, Cutting Hours: 4,474, 10 Station Turret. S/No. 046 (2006) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 109: Daewoo Puma 240L CNC Lathe
Daewoo Puma 240L CNC Lathe with Fanuc i Series Control, Swing over Bed: 550mm, Swing over Saddle: 390mm, 630mm between Centres, Tooleye, 12" Chuck, Swarf Conveyor & Cooljet, Power on Time Hours: 17,939, Running Hours: 6,514, Cutting Hours: 4,474, 10 Station Turret. S/No. 746 (2004) (7) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 110: Harrison Alpha 1550 XS Computerised Centre Lathe
Harrison Alpha 1550 XS Computerised Centre Lathe with GE Alpha X Series Control, Max. Swing over Bed: 554mm, 2000mm between Centres, Manual Chuck, Q.C.T.P, 2000rpm, Spindle Bore: 100mm, Quick Change Toolpost. (2010)
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 111: Harrison Alpha 550 Plus Computerised CNC Gap Bed Lathe
Harrison Alpha 550 Plus Computerised CNC Gap Bed Lathe with GE Fanuc Control, Max. Swing over Bed: 554mm, Max. Swing in Gap: 828mm, 1500mm between Centres & Quick Change Toolpost (1999)
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
View photos for a copy of the original Purchase Invoice.
Lot 112: Harrison M390 Gap Bed Centre Lathe
Harrison M390 Gap Bed Centre Lathe with Newall D.R.O, Swing over Bed: 400mm, 1250mm between Centres, Q.C.T.P, Steady (1996)
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.