2577 - Large Capacity Mills and Borers formerly used in the Business of Eaves Engineering Limited (In Administration) on behalf of a Secured Lender
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: For Lots 1-17, customers will be permitted free use of the electric overhead cranes, providing that they have appropriate certification for the crane driver and slinger. An approved contractor may be used as an alternative for dismantling and loading.
All other lots are located in Manchester and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Please click here to view a brochure for this auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 28
Lot 1: TOS Kurim Model FRFQ200 5-Axis CNC Gantry Mill
TOS Kurim Model FRFQ200 5-Axis CNC Gantry Mill (2000) with Siemens 840 control, Programmable Double Swivel Universal Head, 40 Position Automatic Tool Changer, Renishaw Probing, Twin Swarf Conveyors, Table Size: 6000 x 2000mm, X Traverse: 6000mm, Y Traverse: 2500mm, Z Traverse: 1800mm, Height Under Cross Rail: 1800mm, 50 INT Spindle Taper, Distance Between Columns: 2450mm. S/No. 50182
Please Note: This Item is located in Manchester and will allow free use of the electric overhead travelling cranes providing the customer has appropriate certification for the crane driver and slinger. Alternatively an approved contractor to carry out the dismantling and loading can be used instead.
Lot 2: Soraluce FS1000 4 Axis CNC Floor Type Milling Machine
Soraluce FS1000 4 Axis CNC Floor Type Milling Machine (1992) with Siemens 820 Control, Fully Programmable Universal Head, 20 Ton CNC Rotary Table, Floor Plate 2500 x 5000mm, 60 Position ATC, Swarf Conveyor, X Traverse: 10,000mm, Y Traverse: 2800mm, Z Traverse: 1250mm. S/No. FS10000-OF105017
Please Note: This Item is located in Manchester and will allow free use of the electric overhead travelling cranes providing the customer has appropriate certification for the crane driver and slinger. Alternatively an approved contractor to carry out the dismantling and loading can be used instead.
Lot 3: CME FM6000 3-Axis CNC Floor Type Milling Machine
CME FM6000 3-Axis CNC Floor Type Milling Machine (2007) with Heidenhain 530 Control, Floor Plates: 6500 x 2500mm, Manual Universal Head, Swarf Conveyor, X Traverse: 6000mm, Y Traverse: 3000mm, Z Traverse: 1500mm. S/No. 146 (2007)
Please Note: This Item is located in Manchester and will allow free use of the electric overhead travelling cranes providing the customer has appropriate certification for the crane driver and slinger. Alternatively an approved contractor to carry out the dismantling and loading can be used instead.
Lot 4: Morando 4m Elevating Rail Ram Type CNC Vertical Borer
Morando 4m Elevating Rail Ram Type CNC Vertical Borer with Allen Bradley Series 9 CNC Control, C Axis, Driven Tooling, Table diameter: 4000mm, Maximum Swing: 4300mm, Maximum Height Under Cross Rail: 2200mm, Ram Traverse: 1600mm, 12-Position ATC, Swarf Conveyor, 2 Sets of Table Jaws.
Please Note: This Item is located in Manchester and will allow free use of the electric overhead travelling cranes providing the customer has appropriate certification for the crane driver and slinger. Alternatively an approved contractor to carry out the dismantling and loading can be used instead.
Lot 5: Noble & Lund Model HMA 3-Axis Ram Type CNC Elevating Rail Planomill
Noble & Lund Model HMA 3-Axis Ram Type CNC Elevating Rail
Planomill (1987) with Fagor Control, Table Size: 8400 x 3360mm,
Manual Elevating Side Head, Distance between Columns: 4800mm,
Maximum Height Under Cross Rail: 4800mm, X Traverse: 7600mm, Y
Traverse: 4800mm, Z Traverse: 2500mm. S/No. T925
Please Note: This Item is located in Manchester and will allow free use of the electric overhead travelling cranes providing the customer has appropriate certification for the crane driver and slinger. Alternatively an approved contractor to carry out the dismantling and loading can be used instead.
Lot 6: Craven Double Column Elevating Rail Vertical Borer
Craven Double Column Elevating Rail Vertical Borer, Table diameter: 4300mm, Maximum Swing: 5000mm, Maximum Height Under Cross Rail: 3000mm, Table Speeds: 0.5 - 11rpm, Feeds 0.006 - 0.375" per rev, 2 Sets of Table Jaws, 2 x Vertical Rams, Elevating Side Head, Screw Cutting, 2 x 2 Electronica Axis-DRO. S/No. 170044, ID No. CAF004 (1968)
Please Note: This Item is located in Manchester and will allow free use of the electric overhead travelling cranes providing the customer has appropriate certification for the crane driver and slinger. Alternatively an approved contractor to carry out the dismantling and loading can be used instead.
Lot 7: Onsil Titan SC27 CNC Double Column Elevating Rail Vertical Borer
Onsil Titan SC27 CNC Double Column Elevating Rail Vertical Borer (2008) with Siemens 802 Control, Table Diameter: 2500mm, Maximum Swing: 2640mm, Max Height under Cross Rail: 1800mm, Left Hand Ram, Right Hand Turret, 1 set of Table Jaws. S/No. 010
Please Note: This Item is located in Manchester and will allow free use of the electric overhead travelling cranes providing the customer has appropriate certification for the crane driver and slinger. Alternatively an approved contractor to carry out the dismantling and loading can be used instead.
Lot 8A: Asquith 5 Axis CNC 160 Ram Type Floor Borer
Asquith 5 Axis CNC 160 Ram Type Floor Borer (1981—Retrofitted in 2000) with Heidenhain 426 Control, X Traverse: 7000mm, Y Traverse: 3000mm, Z & W Traverse: 1500mm, 40-Ton CNC Rotary Table 2500 x 2900mm with 1250mm Traverse, 1-Ton Column Mounted Jib Crane.
Please Note: This Item is located in Manchester and will allow free use of the electric overhead travelling cranes providing the customer has appropriate certification for the crane driver and slinger. Alternatively an approved contractor to carry out the dismantling and loading can be used instead.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 8B: CNC Rotary Table
CNC Rotary Table 2500mm x 2900mm
Please Note: This Item is located in Manchester and will allow free use of the electric overhead travelling cranes providing the customer has appropriate certification for the crane driver and slinger. Alternatively an approved contractor to carry out the dismantling and loading can be used instead.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 8C: (2) Machine Ground Slotted Tables
(2) Machine Ground Slotted Tables; (1) Machine Ground Slotted Table 12ft x 9ft & (1) Machine Ground Slotted Table 8ft x 8ft
Please Note: This Item is located in Manchester and will allow free use of the electric overhead travelling cranes providing the customer has appropriate certification for the crane driver and slinger. Alternatively an approved contractor to carry out the dismantling and loading can be used instead.