2591 - High Quality CNC Doosan Vertical Machining Centres & Lathes and Conventional Toolroom Equipment previously used by George Taylor (Engineering) Ltd
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Please Note: These Lots are located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a brochure for this auction
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer on Wednesday 7th June 2017.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Warunki specjalne
Przedmioty 1-10 z 49
Przedmiot 100: Daewoo Mynx DNM500ii CNC Vertical Machining Centre
Daewoo Mynx DNM500ii CNC Vertical Machining Centre with Fanuc i Series Control, Table Size: 1200mm x 540mm, Power on Time Hours: 4,269, Running Hours: 1,455, Cutting Hours: 1,376, 30ATC. S/No. 2447 (2014) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
View photos for a copy of the original Purchase Invoice.
Przedmiot 100A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Doosan DNM 500 II)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Przedmiot 100B: Collect chuck with Collets
Collect chuck with Collets (Suitable for Daewoo Machining Centers)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Przedmiot 101: Daewoo Mynx DNM 650 CNC Vertical Machining Centre
Daewoo Mynx DNM 650 CNC Vertical Machining Centre with Fanuc i Series Control, Table Size: 1300mm x 670mm, Chiller & Swarf Conveyor, Power on Time Hours: 14,482, Running Hours: 6,122, Cutting Hours: 5,252, 30ATC. S/No. 65 (03/2009) (8) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Przedmiot 101A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Doosan DNM 650)
Please Note: This Item is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Przedmiot 102: Daewoo Mynx NM410 CNC Vertical Machining Centre
Daewoo Mynx NM410 CNC Vertical Machining Centre with Fanuc OI-MC Control, Table Size: 762mm x 410mm, Swarf Conveyor & Cooljet, Power on Time Hours: 17,521, Running Hours: 3,382, Cutting Hours: 4,447, 24ATC. S/No. 476 (2006) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
View photos for a copy of the original Purchase Invoice.
Przedmiot 102A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Daewoo Mynx 540)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Przedmiot 103: Daewoo Mynx 540 CNC Vertical Machining Centre
Daewoo Mynx 540 CNC Vertical Machining Centre with Fanuc 21MB Control, Table Size: 1200mm x 500mm, Swarf Conveyor, Cooljet, Power on Time Hours: 21,980, Running Hours: 7,452, Cutting Hours: 6,777, 30ATC. S/No. 1986 (09/2004) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Przedmiot 103A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Daewoo Mynx 540)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Przedmiot 104: Daewoo Puma 400B CNC Lathe
Daewoo Puma 400B CNC Lathe with Fanuc 32i Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye & Swarf Conveyor, Power on Time Hours: 8,317, Running Hours: 4,361, Cutting Hours: 3,267, 10 Station Turret. S/No. 4449 (2011) (9) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.