2448 - CNC Wire Eroders, Spark Eroder and Die Sinker, CNC Machining Centres, Conventional Machine Tools and CM1000 Sand Blasting Machine No Longer Required by Eroga Die Co Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Gloucestershire. Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Thursday 17th December 2015
And then from:-
4th January 2016 to 14th January 2016
(There will be no clearance on site between 18th December 2015 and 3rd January 2016 inclusive)
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 19
Lot 1: Charmilles Robo-Form Type 31 CNC EDM Die Sink
Charmilles Robo-Form Type 31 CNC EDM Die Sink. S/No. 75537/635168 (1998)
Please Note: This Item is located in Gloucester, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser
Lot 2: Charmilles Robofil 290 CNC Wire Eroder
Charmilles Robofil 290 CNC Wire Eroder. S/No. 7.2618/330792
(1998)
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Lot 3: Charmilles Robofil 500/310 CNC Wire Eroder
Charmilles Robofil 500/310 CNC Wire Eroder. S/No. 6.2464/355053
(1996)
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Lot 4: Charmilles Robofil 310 CNC Wire Eroder
Charmilles Robofil 310 CNC Wire Eroder. S/No. 350 198 (1992)
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Lot 5: Joemars Eurospark Model JMNC43A Spark Eroder.
Joemars Eurospark Model JMNC43A Spark Eroder. S/No. 9071499 with
P75 Power Supply and D43A Fluid System, 1100mm x 550mm x 300mm
Tank, 650mm x 400mm Table.
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Lot 6: GEE EDM 500 Spark Eroder
GEE EDM 500 Spark Eroder, 600mm diameter Table, Vectorsparc
Control, Anilam Wizard, 2 Axis DRO. S/No. 108802
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Lot 7: Leadwell V-30i Vertical Machining Centre
Leadwell V-30i Vertical Machining Centre with Series Fanuc 01-MC
Control. S/No. L2T JH0017 (2008), Table Size 890mm x 500mm, 8,000
RPM Spindle, 24-Station ATC with Swarf Conveyor, BT40 Tooling with
Table Mounted Tool Sensor.
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Lot 8: Leadwell V30 Vertical Machining Centre
Leadwell V30 Vertical Machining Centre with Mitsubishi Control,
Swarf Filtration System, Table Size 890mm x 400mm, 24-Station ATC,
BT40 Tooling. S/No. L2TJJ0532 (2000)
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Lot 9: Leadwell V40 Vertical Machining Centre
Leadwell V40 Vertical Machining Centre with Mitsubishi Control.
S/No. LISIH0042 (2000), Table Size 1200mm x 500mm, 20-Station ATC,
BT40 Tooling. (1998)
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Lot 10: Leadwell VMC 25 Vertical Machining Centre
Leadwell VMC 25 Vertical Machining Centre. S/No. LISID0082 (1994), Table Size 850mm x 400mm, 20-Station ATC, Mitsubishi CNC Control, BT40 Tooling.
Please Note: This Item is for Spares & Repairs
Only
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser