2442 - Rebar, Manufacturing & Processing Plant previously used by Pigazzi Reti Srl, Phase 3
Engineering
Auction ended on
Time left
Auction description
Location: These Items are located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser
Strict Clearance Date. Items must be removed by the Final Clearance Date.
Italian Office Clearance Dates :-
Due to the Christmas break the removal dates for these items
will be as follows:
Up until Wednesday 23rd December 2015
And then from:-
6th January 2016 to 14th January 2016
(There will be no clearance on site between 24th December
2015 and 6th January 2016 inclusive)
Buyer's premium
Buyer's Premium will be charged at 18.00%.
VAT
Value added tax will be charged at 22.00%.
Viewing times
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.
Notice to purchasers
Final payment date
Final clearance date
Shipping agents
Storage contractors
Exporting/Importing from the UK details
Lots 1-10 of 11
Lot 1: Comapac Multipass Cold Drawing Rebar Line
Comapac Multipass Cold Drawing Rebar Line. S/No. 00-24 (2000)
The plant consists of the following units:
Comapac Model PVD2 Unwinding Vertical Double. S/No. 00-24-1
(2001)
Flexing Group, Model SN/9. S/No. 00-24-4 (2000)
Scaling Machine for Calamine, Model SC6R. S/No. 00-24-3
(2000)
Comapac CO-LO15 Monobloc Horizontal Axis. S/No. 00-24-2
(2001)
Comapac Model BT40-U Horizontal Bobin. S/No. 00-24-5 (2000)
The system works "rods" from 5.5mm to 13 mm, working speed
up to 12 m / sec.
Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser
Lot 2: Line for Rebar, Cold Rolling Mill, Model TV40/2
Line for Rebar, Cold Rolling Mill Model TV40/2 (1979)
Consisting of the following units:
Comapac Model PVD2 Double Vertical Positioner. S/No. 96/55
(1997)
Flexing Group
Group Distribution Staerato
Possibility of returning to the second step of "Head of
Turkish" brand FROMA
Monobloc Model TV40/2 Vertical Axis Mill
Bobin Mill
The system works "rods" 5,5 mm up to 9mm
Working speed up to 6 m / sec
Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser
Lot 3: Automatic for production of Armour of panel curtain ‘Effeci’
Automatic for production of Armour of panel curtain 'Effeci'
The plant is used for the manufacture of armor shaped for infill
panels, curbs, and pillars, welding of wire mesh.
The plant consists of the following units:
Vibrant Tour, Welding, Cross warehouse, Group of shaping S/No.
00720 (2002)
Extraction and positioning Effeci, S/No. 00721 (2003)
Piegareti, Maximum length producible networks: cm. 1200,
Maximum width producible networks: cm. 160, Maximum longitudinal
diameter: 14 mm, Maximum transverse diameter: 8 mm, N.max
longitudinal bars: 6, Minimum longitudinal pitch: 50 mm and Maximum
feed rate: 60 beats / minute.
Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of ...
Lot 7A: Qty 10 Coils (Bobbins)
Qty 10 Coils (Bobbins)
Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser
Lot 7B: Qty 10 Coils (Bobbins)
Qty 10 Coils (Bobbins)
Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser
Lot 7C: Qty 5 Coils (Bobbins)
Qty 5 Coils (Bobbins)
Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser
Lot 7E: Qty 2 Coils (Bobbins)
Qty 2 Coils (Bobbins)
Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser
Lot 19: Omes RF20 Straightening & Cutting Machine
Omes RF20 Straightening & Cutting Machine, Straightening composed of Cabinet, Wire Diameter: 8 – 14mm, Feed Speed: +/- 60m/min, Workable's Smooth Round: 5 – 20mm, Workable Ribbed Rebar: 4 – 16mm, Minimum Cutting Length: 500mm, Maximum Cutting Length: 12000mm, Type of Workable Material: Round Steel Construction – Smooth or Ribbed
Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser
Lot 23: Manipulator Yard
Manipulator Yard, served to raise the welded mesh. The manipulator is applied to the Crane with adjustable pneumatic clamps, networks raise up to 12m wide, Max. Capacity: 540kg. S/No 0210 (2010)
Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser
Lot 24: Manipulator Yard
Manipulator Yard, served to raise the welded mesh. The manipulator is applied to the Crane with adjustable pneumatic clamps, networks raise up to 12m wide, Max. Capacity: 540kg. S/No. 0310 (2010)
Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser