2611 - Wire and Cable Manufacturing Facility no longer required by Mantovani & Serrazi Srl

In Association With

2611 - Mantovani - Perfection Logo

Engineering

Auction ends on

2017-09-27 15:00:00.0
Add to calendar

Time left

38 Days, 4 Hours, 9 Mins

Auction description

Location: These Items are located in Druento, Turin, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser. 

Buyers premium

Buyers Premium will be charged at 16.00%.

VAT

Value added tax will be charged at 22.00%.

Viewing times

Viewing is available by appointment only with the Auctioneer

Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2017-09-29 17:00:00.0

Final clearance date

2017-10-12 17:00:00.0

Shipping agents

Storage contractors

Number of lots per page

Lots 1-10 of 162

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Buyers premium:
16.00%
VAT rate:
22.00%

Lot 1: 2003 ROSENDAHL Fiber Optic Extrusion Line for Premise Cables with MFH400 12 Spindle Payoff

2003 ROSENDAHL Fiber Optic Extrusion Line for Premise Cables with MFH400 12 Spindle Payoff, S/No. RA505701; MFA500 12 Station Multi-Fiber Payoff, S/No. RAP029; SSZ-42 SZ Strander, S/No. RAP02903; ROBLON LTS-1110-18 Low Tension Server, S/No. LTS-2009; HOFFMAN 2X80030 Preheater, S/No. 2003-10; RE1.80/24 80mm 24:1 Extruder, S/No. RAP029, with (2) PLASTICOLOR 1000 Color Meters; 2004 RE1.30/24 30mm 24:1 Vertical Extruder, S/No. AAS00203, with (2) PLASTICOLOR 1000 Color Meters; 2005 LABOTEK DDM 180-3 Desiccant Dryer, S/No. OKB3-6801445; HB-THERM HB-O 250 Series 3 Temp Controller, S/No. 322-5762; RFL 200.1.E Jelly Fill Unit, S/No. NA; 65’ STAINLESS STEEL WATER TROUGH with KS35/22A+ESA800 4m/1m Stroke Telescopic Section, S/No. ...

Preview image
Buyers premium:
16.00%
VAT rate:
22.00%

Lot 2: NOKIA MAILLEFER 100mm Extrusion Line with NM TAVR6.7-22AT 2200mm Portal Payoff

NOKIA MAILLEFER 100mm Extrusion Line with NM TAVR6.7-22AT 2200mm Portal Payoff, S/No. 02-1520; DUSSEK CAMPBELL Fill System, S/No. V566/89;TERMOMACCHINE Pre-Heater; DUSSEK CAMPBELL Jelly Fill/Binder Head, S/No. V566/89; DUSSEK CAMBELL Metal Tape Former; NM NMA100-24D 100mm 24:1 Extruder, S/No. 89-5204/4 with 113.1 kw Motor, Hopper Loader; Master 10 Zone Temp Panel & ZUMBACH ODAC Controller; NM BAC OV75 2280cm Stainless Steel Water Trough, S/No. 89-5204/2; 2000 IMAJE JAIME 1000 Ink Jet Printer, S/No. 0250754A; ZUMBACH AST-HD Spark Tester, S/No. NA; NM Chenille UA8 400mm Continuous Belt Caterpuller Capstan, S/No. 89-5204/10; NM SL-50 Catenary Arm Dancer, S/No. CM-1350-09-1; NM SLM-12/3+4 Catenary Arm Capstan, S/No. 104; ...

Preview image
Buyers premium:
16.00%
VAT rate:
22.00%

Lot 3: NOKIA MAILLEFER 60mm Extrusion Line #1 with CERRINI 630mm Dual Flyer Cone Payoff with Reel Trucks

NOKIA MAILLEFER 60mm Extrusion Line #1 with CERRINI 630mm Dual Flyer Cone Payoff with Reel Trucks; BETA 20 kva Inverter; NM Pre-Heater; 1990 NM NMA60-24D 60mm 24:1 Extruder, S/No. 90-5023/3, w/ 42.2 km Motor, 2000 PLASTICOLOR PC200 Colour Meter, Master Temp Panel, USTER METREX 4 Control, BETA C540 Control; NM BAC MOBILE OV6 Stainless Steel Water Trough, S/No. 90-5206/7; NM Bac ret OV4/350 Mist Capstan, S/No. 90-5206/7; NM Secheur OV6/2500 Stainless Steel Water Trough, S/No. 90-5206/7; ZUMBACH AST15.HF.12.40 Spark Tester, S/No. 706.349.2; ZUMBACH ODAC 12XY-CMK ODAC Scanner, S/No. 3040.1150; ZUMBACH SP.001.08000 SP Controller, S/No. 706.1849.2; USTER METREX 4 Monitor, S/No. 632; NM EKP63 630mm Parallel Axis Dual Reel ...

Preview image
Buyers premium:
16.00%
VAT rate:
22.00%

Lot 4: NOKIA MAILLEFER 60mm Extrusion Line #2 with NM Defileur KR630 630mm Dual Flyer Cone Payoff

NOKIA MAILLEFER 60mm Extrusion Line #2 with NM Defileur KR630 630mm Dual Flyer Cone Payoff, S/No. 90-5206/1; NM Devidoir JG 630mm Powered Payoff, S/No. 84-5036N; BETA MCS5-12 Pre-Heater, S/No. 16137; NM BMA60-24D 60mm 24:1 Extruder, S/No. 84-5036C, w/ MASTER 8 Zone Temp Panel, EUROTHERM Controllers, ZUMBACH USYS-CAPAC HS Capacitance Controller; NM Bac MOBILE OU75 Retractable 300cm Stainless Steel Water Trough; NM Bac FIXE OU75 610cm Stainless Steel Water Trough, 84-5036F; NM Bac MOBILE OU75 Retractable 150cm Stainless Steel Water Trough, S/No. 84-5036E; ZUMBACH IST Spark Tester, S/No. 2762.583; ZUMBACH DC3 Diameter Gauge w/ ODAC Control, S/No. 2114.1915; ZUMBACH ODAC 16-J Scanner head, S/No. 207.355; NM Chenille UA2 ...

Preview image
Buyers premium:
16.00%
VAT rate:
22.00%

Lot 5: LUIGI BANDERA 150mm Extrusion Line with Payoff

LUIGI BANDERA 150mm Extrusion Line with Payoff; Cross Head; Water Trough; ZUMBACH AST Spark Tester; IMAGE JAIME 1000 Ink Jet Printer; Dual Reel Capstan/Spooler

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
22.00%

Lot 6: LUIGI BANDERA 60mm Extrusion Lines with Payoff

LUIGI BANDERA 60mm Extrusion Lines with Payoff; Cross Head; Water Trough; ZUMBACH IST Spark Tester, IMAJE Ink Jet Printer; Dual Reel Capstan/Spooler

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
22.00%

Lot 7: LUIGI BANDERA 60mm Extrusion Lines with Payoff

LUIGI BANDERA 60mm Extrusion Lines with Payoff; Cross Head; Water Trough; ZUMBACH IST Spark Tester, IMAJE Ink Jet Printer; Dual Reel Capstan/Spooler

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser

Preview image
Buyers premium:
16.00%
VAT rate:
22.00%

Lot 8: LUIGI BANDERA 60mm Extrusion Lines with Payoff

LUIGI BANDERA 60mm Extrusion Lines with Payoff; Cross Head; Water Trough; ZUMBACH IST Spark Tester, IMAJE Ink Jet Printer; Dual Reel Capstan/Spooler

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser

Preview image
Buyers premium:
16.00%
VAT rate:
22.00%

Lot 9: LUIGI BANDERA 60mm Extrusion Lines with Payoff

LUIGI BANDERA 60mm Extrusion Lines with Payoff; Cross Head; Water Trough; ZUMBACH IST Spark Tester, IMAJE Ink Jet Printer; Dual Reel Capstan/Spooler

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser

Preview image
Buyers premium:
16.00%
VAT rate:
22.00%

Lot 10: LUIGI BANDERA 60mm Extrusion Lines with Payoff

LUIGI BANDERA 60mm Extrusion Lines with Payoff; Cross Head; Water Trough; ZUMBACH IST Spark Tester, IMAJE Ink Jet Printer; Dual Reel Capstan/Spooler

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Categories