2611 - Toolroom Machinery, Welders, Inspection and Lifting Equipment for Wire and Cable Manufacturing Facility no longer required by Mantovani & Serrazi Srl

En collaboration avec

Engineering

L'enchère s'est terminée le

2017-09-27 10:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These Items are located in Druento, Turin, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'

Temps de consultation

Viewing is available by appointment only with the Auctioneer on Tuesday 26th September 2017.

Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2017-09-29 15:00:00.0

'Date limite d''apurement'

2017-10-12 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 81-90 de 110

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
27 sept. 2017 10:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 578: Atlas Copco GA45FF Compressor, Max Pressure 7.5 Bar

Atlas Copco GA45FF Compressor, Max Pressure 7.5 Bar. S/No. AII363305 (1999)

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
27 sept. 2017 11:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 579: Air Cylinder S20V0

Air Cylinder S20V0 129.12, 12 Bar. S/No. B11867

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
27 sept. 2017 10:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 580: Atlas Copco GA122 Dryer

Atlas Copco GA122 Dryer, 7.5 Bar. S/No. ARP734341

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
27 sept. 2017 11:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 581: Sigma Racking (Excluding Contents)

Sigma Racking (Excluding Contents) 31.5m x 700mm x 3.6m high approx.

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
27 sept. 2017 11:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 582: Sigma Racking (Excluding Contents)

Sigma Racking (Excluding Contents) 29.4m x 700mm x 3.6m high approx.

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
27 sept. 2017 10:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 583: Sigma Racking (Excluding Contents)

Sigma Racking (Excluding Contents) 31.5m x 700mm x 3.6m high approx.

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
27 sept. 2017 10:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 584: 8 Step Mobile Step Ladder

8 Step Mobile Step Ladder

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
27 sept. 2017 10:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 585: Sigma Racking (Excluding Contents)

Sigma Racking (Excluding Contents) 29.4m x width 700mm x 3.6m high

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
27 sept. 2017 10:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 586: Sigma Racking (Excluding Contents)

Sigma Racking (Excluding Contents) 29.4m x width 700mm x 3.6m high

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
27 sept. 2017 10:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 587: Sigma Racking (Excluding Contents)

Sigma Racking 31.5m length x 700mm witdth x 3.6m high (Excluding Contents)

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories