2611 - Toolroom Machinery, Welders, Inspection and Lifting Equipment for Wire and Cable Manufacturing Facility no longer required by Mantovani & Serrazi Srl
In Zusammenarbeit mit
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Items are located in Druento, Turin, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer on Tuesday 26th September 2017.
Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 110
Los 500: Graziano Tortona Lathe
Graziano Tortona Lathe, distance between Centres 2.5m, 380mm 3 Jaw Chuck, 380mm 3 Jaw Chuck, 500mm 4 Jaw Chuck, Face Plate, Quick Change Tooling with Steady’s, S/No. 60708
Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.
Los 501: Ursus 200 Lathe
Ursus 200 Lathe, distance between Centres 1m, 230mm 3 Jaw Chuck, Logan Dro, Quick Change Tooling, S/No. CMT 9007
Please Note: This Item is located in Druento, Turin, Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.
Los 502: Fortuna Lathe
Fortuna Lathe, distance between Centres 800mm, 3 Point Steady, 160mm 3 Jaw Chuck, 160mm 3 Jaw Chuck, 300mm 4 Jaw Chuck, Quick Change Tooling
Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.
Los 503: Rambaudi Torino VR2 Turret Mill
Rambaudi Torino VR2 Turret Mill, Table size 1600mm x 250mm with Attachments
Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.
Los 503A: High Speed Spindle
High Speed Spindle
Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.
Los 504: Atieffe Au 400 Grinder
Atieffe Au 400 Grinder, Table size 720mm x 130mm, 350mm between centres
Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.
Los 505: Oget ARC 400 Arc Welder
Oget ARC 400 Arc Welder + Europa 92 Future 1st Extraction
Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.
Los 506: Helvi Galileo 175 Welder
Helvi Galileo 175 Welder, S/No. X-11-100 764
Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.
Los 507: Arc Welder
Arc Welder
Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.
Los 508: (2) x Double Ended Grinder
(2) x Double Ended Grinder 200mm, S/No. 550959 & S/No. 715413
Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.