2606 - Mazak Machining Centres, Hardinge CNC Lathe, J&S Grinder, TBT Gun Drill and Charmilles EDM's formerly used by Swan Lane Engineering and Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: Lot 2 is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lot 1, 3, 4 & 5 are located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-3 de 3
Lot 1: Mazak HCN5000 Twin Pallet Horizontal Machining Centre
Mazak HCN5000 Twin Pallet Horizontal Machining Centre with Mazatrol Nexus 640M Control System, Maximum Spindle speed 18000rpm, Cat 40 Spindle Taper 5, Axis travels X=730mm Y=730mm Z=740mm, Pallet dimensions 500mm x 500mm, Maximum Load per Pallet 700kg, 40 Station ATC, Through Spindle Coolant, Swarf Conveyor. S/No. 181567 (2006)
Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 2: Mazak Variaxis 630 5X Vertical Machining Centre
Mazak Variaxis 630 5X Vertical Machining Centre with Mazatrol PC Fusion-CNC 640M Control System, Maximum Spindle speed 25000rpm, Din 40 Spindle Taper, Axis travels X=630mm Y=765mm Z=510mm A=150 Degrees (+30/-120) C=360 Degrees (0.001), 30 Station ATC, Through Spindle Coolant, Renishaw NC4 Tool Presetter, Renishaw Probe Interface, Swarf Conveyor, Manuals. (Please Note: There is no Probe with this Machine) S/No. 164429 (2003)
Please Note: This Lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 3: Mazak AJV 32/604N Machining Centre
Mazak AJV 32/604N Vertical Machining Centre fitted with Mazatrol M32 Control System, Axis travels X=1500mm Y=700mm Z=460mm, Maximum Spindle speed 4000rpm, ISO40 Spindle Taper. 40 Station ATC, Table dimensions 1740mm x 650mm, Distance between Columns 800mm, Maximum load on Table 1500Kg. S/No. 106449 (1993)
Please Note: This Lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.