2606 - Mazak Machining Centres, Hardinge CNC Lathe, J&S Grinder, TBT Gun Drill and Charmilles EDM's formerly used by Swan Lane Engineering and Others
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: Lot 2 is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lot 1, 3, 4 & 5 are located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-3 von 3
Los 1: Mazak HCN5000 Twin Pallet Horizontal Machining Centre
Mazak HCN5000 Twin Pallet Horizontal Machining Centre with Mazatrol Nexus 640M Control System, Maximum Spindle speed 18000rpm, Cat 40 Spindle Taper 5, Axis travels X=730mm Y=730mm Z=740mm, Pallet dimensions 500mm x 500mm, Maximum Load per Pallet 700kg, 40 Station ATC, Through Spindle Coolant, Swarf Conveyor. S/No. 181567 (2006)
Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 2: Mazak Variaxis 630 5X Vertical Machining Centre
Mazak Variaxis 630 5X Vertical Machining Centre with Mazatrol PC Fusion-CNC 640M Control System, Maximum Spindle speed 25000rpm, Din 40 Spindle Taper, Axis travels X=630mm Y=765mm Z=510mm A=150 Degrees (+30/-120) C=360 Degrees (0.001), 30 Station ATC, Through Spindle Coolant, Renishaw NC4 Tool Presetter, Renishaw Probe Interface, Swarf Conveyor, Manuals. (Please Note: There is no Probe with this Machine) S/No. 164429 (2003)
Please Note: This Lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 3: Mazak AJV 32/604N Machining Centre
Mazak AJV 32/604N Vertical Machining Centre fitted with Mazatrol M32 Control System, Axis travels X=1500mm Y=700mm Z=460mm, Maximum Spindle speed 4000rpm, ISO40 Spindle Taper. 40 Station ATC, Table dimensions 1740mm x 650mm, Distance between Columns 800mm, Maximum load on Table 1500Kg. S/No. 106449 (1993)
Please Note: This Lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.