2601 - CNC Lathes, Machining Centres & Vertical Borer no longer required by a Manufacturer in the Oil & Gas Industry
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Birmingham, Broxburn and Glenrothes. Please see individual lots for location and loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 22
Lot 100: Daewoo Puma 450A CNC Lathe with Fanuc OT Control
Daewoo Puma 450A CNC Lathe with Fanuc OT Control, 1500mm between Centres, Spindle Bore 100mm dia, 600mm dia 3 Jaw Chuck, Chuck Bore 160mm, 12 Station Turret, Tool Setter, Manual Steady Rest, Tailstock. S/No. PM450123 (10/1997) with 4 Tools and Steady.
Please Note: This lot is located in Birmingham.
Lot 101: Mazak Integrex 60X 4000U CNC Lathe
Mazak Integrex 60X 4000U CNC Lathe with Mazatrol T32-3 Control, 80-Station Toolchanger, 500mm 3-Jaw Chuck, Milling & Turning Turret, Tailstock, Swarf Conveyor, VDI Tooling & BT50 Tooling. S/No. 104744 (1992)
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 102: Mazak Integrex 50 CNC Lathe with Mazatrol T Plus Control
Mazak Integrex 50 CNC Lathe with Mazatrol T Plus Control, 1500mm between Centres, 30 Tool ATC, CAT 50 Tooling, Tool Eye, 450mm 3 Jaw Chuck, Tailstock, SMW Steady Rest SLU-4-MS 35-245 Capacity. S/No. 112485 (1994) with 15 Tools and Hydraulic Steady.
Please Note: This lot is located in Birmingham. This lot can only be loaded to a suitable vehicle by our authorised transport. The loading fee for this item will be £250.
Lot 103: Dorries CTE109 CNC Ram Type Vertical Borer
Dorries CTE109 CNC Ram Type Vertical Borer Retrofitted with Fagor CNC Control, 1000mm 4-Jaw Chuck & Swarf Conveyor. S/No. 0149/50768 (1980)
Please Note: This Item is located in Glenrothes, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 104: Hyundai Supertec H-630 Machining Centre with Mazatrol M-32 Control
Hyundai Supertec H-630 Machining Centre with Mazatrol M-32 Control, 40 Tool ATC, BT 50, 6000rpm, 630 x 630mm Pallets, 1 Degree Pallet Index, Swarf Conveyor. S/No. 5009 (1995) with 7 Tools.
Please Note: This lot is located in Birmingham. This lot can only be loaded to a suitable vehicle by our authorised transport. The loading fee for this item will be £250.
Lot 105: Richards PRT Horizontal Borer
Richards PRT Horizontal Borer, Table Size: 5ft x 3ft, 28" Chuck, Sub Table: 42" x 42", 9ft from Head to Back. S/No. 324 (1958)
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 106: Richards PRT 2N Horizontal Borer
Richards PRT 2N Horizontal Borer, Table Size: 4ft x 30", 22" Chuck, Sub Table: 3ft x 3ft. S/No. 3632 (1977)
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 107: Herbert No. 14/36 Capstan Lathe
Herbert No. 14/36 Capstan Lathe with 31" 4-Jaw Chuck
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 108: Herbert No. 9C-30 Capstan Lathe
Herbert No. 9C-30 Capstan Lathe with 25" 4-Jaw Chuck. S/No. 25-1894
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 109: Herbert No. 14/36 Capstan Lathe
Herbert No. 14/36 Capstan Lathe with 33" 4-Jaw Chuck. S/No. 8-2673
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.