2591 - High Quality CNC Doosan Vertical Machining Centres & Lathes and Conventional Toolroom Equipment previously used by George Taylor (Engineering) Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These Lots are located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a brochure for this auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer on Wednesday 7th June 2017.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Conditions spécifiques
Lots 1-10 de 49
Lot 100: Daewoo Mynx DNM500ii CNC Vertical Machining Centre
Daewoo Mynx DNM500ii CNC Vertical Machining Centre with Fanuc i Series Control, Table Size: 1200mm x 540mm, Power on Time Hours: 4,269, Running Hours: 1,455, Cutting Hours: 1,376, 30ATC. S/No. 2447 (2014) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
View photos for a copy of the original Purchase Invoice.
Lot 100A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Doosan DNM 500 II)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Lot 100B: Collect chuck with Collets
Collect chuck with Collets (Suitable for Daewoo Machining Centers)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Lot 101: Daewoo Mynx DNM 650 CNC Vertical Machining Centre
Daewoo Mynx DNM 650 CNC Vertical Machining Centre with Fanuc i Series Control, Table Size: 1300mm x 670mm, Chiller & Swarf Conveyor, Power on Time Hours: 14,482, Running Hours: 6,122, Cutting Hours: 5,252, 30ATC. S/No. 65 (03/2009) (8) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 101A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Doosan DNM 650)
Please Note: This Item is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 102: Daewoo Mynx NM410 CNC Vertical Machining Centre
Daewoo Mynx NM410 CNC Vertical Machining Centre with Fanuc OI-MC Control, Table Size: 762mm x 410mm, Swarf Conveyor & Cooljet, Power on Time Hours: 17,521, Running Hours: 3,382, Cutting Hours: 4,447, 24ATC. S/No. 476 (2006) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
View photos for a copy of the original Purchase Invoice.
Lot 102A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Daewoo Mynx 540)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Lot 103: Daewoo Mynx 540 CNC Vertical Machining Centre
Daewoo Mynx 540 CNC Vertical Machining Centre with Fanuc 21MB Control, Table Size: 1200mm x 500mm, Swarf Conveyor, Cooljet, Power on Time Hours: 21,980, Running Hours: 7,452, Cutting Hours: 6,777, 30ATC. S/No. 1986 (09/2004) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 103A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Daewoo Mynx 540)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Lot 104: Daewoo Puma 400B CNC Lathe
Daewoo Puma 400B CNC Lathe with Fanuc 32i Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye & Swarf Conveyor, Power on Time Hours: 8,317, Running Hours: 4,361, Cutting Hours: 3,267, 10 Station Turret. S/No. 4449 (2011) (9) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.