2591 - High Quality CNC Doosan Vertical Machining Centres & Lathes and Conventional Toolroom Equipment previously used by George Taylor (Engineering) Ltd

Engineering

L'enchère s'est terminée le

2017-06-14 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These Lots are located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Please click here to view a brochure for this auction

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer on Wednesday 7th June 2017.

Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2017-06-16 17:00:00.0

'Date limite d''apurement'

2017-06-29 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Conditions spécifiques

Lots 1-9 de 9

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
14 juin 2017 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 104: Daewoo Puma 400B CNC Lathe

Daewoo Puma 400B CNC Lathe with Fanuc 32i Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye & Swarf Conveyor, Power on Time Hours: 8,317, Running Hours: 4,361, Cutting Hours: 3,267, 10 Station Turret. S/No. 4449 (2011) (9) Tools

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Fin:
14 juin 2017 16:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 105: Daewoo Puma 400B CNC Lathe

Daewoo Puma 400B CNC Lathe with Fanuc 21i-TB Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye, 530mm Chuck, Swarf Conveyor, Power on Time Hours: 12,246, Running Hours: 6,007, Cutting Hours: 4,395, 10 Station Turret. S/No. 2249 (2006) (6) Tools

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

View photos for a copy of the original Purchase Invoice.

Preview image
Fin:
14 juin 2017 15:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 106: Daewoo Puma 400LB CNC Lathe

Daewoo Puma 400LB CNC Lathe with Fanuc 18-iT Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 2100mm between Centres, Tooleye, Swarf Conveyor & 450mm Chuck, Power on Time Hours: 24,306, Running Hours: 7,709, Cutting Hours: 7,466, 20 Station Turret.  S/No. 1100 (2001) (8) Tools

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

View photos for a copy of the original Purchase Invoice.

Preview image
Fin:
14 juin 2017 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 107: Daewoo Puma 2600L CNC Lathe

Daewoo Puma 2600L CNC Lathe with Fanuc i Series Control, Swing over Bed: 630mm, Swing over Saddle: 500mm, 1500mm between Centres, 12" Chuck, Tooleye & Parts Catcher, Power on Time Hours: 3,548, Running Hours: 1,700, Cutting Hours: 875, 12 Station Turret. S/No. 374 (2013) 

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

View photos for a copy of the original Purchase Invoice.

Preview image
Fin:
14 juin 2017 16:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 108: Daewoo Puma 280 CNC Lathe

Daewoo Puma 280 CNC Lathe with Fanuc 21-TB Control, Swing over Bed: 630mm, Swing over Saddle: 500mm, 630mm between Centres, 12" Chuck, Tooleye, Parts Catcher, Power on Time Hours: 17,939, Running Hours: 6,514, Cutting Hours: 4,474, 10 Station Turret.  S/No. 046 (2006) (6) Tools

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Fin:
14 juin 2017 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 109: Daewoo Puma 240L CNC Lathe

Daewoo Puma 240L CNC Lathe with Fanuc i Series Control, Swing over Bed: 550mm, Swing over Saddle: 390mm, 630mm between Centres, Tooleye, 12" Chuck, Swarf Conveyor & Cooljet, Power on Time Hours: 17,939, Running Hours: 6,514, Cutting Hours: 4,474, 10 Station Turret.  S/No. 746 (2004) (7) Tools

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Fin:
14 juin 2017 16:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 110: Harrison Alpha 1550 XS Computerised Centre Lathe

Harrison Alpha 1550 XS Computerised Centre Lathe with GE Alpha X Series Control, Max. Swing over Bed: 554mm, 2000mm between Centres, Manual Chuck, Q.C.T.P, 2000rpm, Spindle Bore: 100mm, Quick Change Toolpost. (2010)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Fin:
14 juin 2017 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 111: Harrison Alpha 550 Plus Computerised CNC Gap Bed Lathe

Harrison Alpha 550 Plus Computerised CNC Gap Bed Lathe with GE Fanuc Control, Max. Swing over Bed: 554mm, Max. Swing in Gap: 828mm, 1500mm between Centres & Quick Change Toolpost (1999)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

View photos for a copy of the original Purchase Invoice.

Preview image
Fin:
14 juin 2017 15:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 112: Harrison M390 Gap Bed Centre Lathe

Harrison M390 Gap Bed Centre Lathe with Newall D.R.O, Swing over Bed: 400mm, 1250mm between Centres, Q.C.T.P, Steady (1996)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories