2591 - High Quality CNC Doosan Vertical Machining Centres & Lathes and Conventional Toolroom Equipment previously used by George Taylor (Engineering) Ltd

Engineering

Auction ends on

2017-06-14 15:00:00.0
Add to calendar

Time left

20 Days, 12 Hours, 45 Mins

Auction description

Please Note: These Lots are located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Buyers premium

Buyers Premium will be charged at 16.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing will be available by appointment only with the Auctioneer on Wednesday 7th June 2017.

Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2017-06-16 17:00:00.0

Final clearance date

2017-06-29 17:00:00.0

Shipping agents

Storage contractors

Specific conditions

Number of lots per page

Lots 1-10 of 19

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 1: Daewoo Mynx DNM500ii CNC Vertical Machining Centre

Daewoo Mynx DNM500ii CNC Vertical Machining Centre with Fanuc i Series Control, Table Size: 1200mm x 540mm, Power on Time Hours: 4,269, Running Hours: 1,455, Cutting Hours: 1,376. S/No. 2447 (2014)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 2: Daewoo Mynx DNM 650 CNC Vertical Machining Centre

Daewoo Mynx DNM 650 CNC Vertical Machining Centre with Fanuc i Series Control, Table Size: 1300mm x 670mm, Chiller & Swarf Conveyor, Power on Time Hours: 14,482, Running Hours: 6,122, Cutting Hours: 5,252. S/No. 65 (03/2009)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 3: Daewoo Mynx NM410 CNC Vertical Machining Centre

Daewoo Mynx NM410 CNC Vertical Machining Centre with Fanuc OI-MC Control, Table Size: 762mm x 410mm, Swarf Conveyor & Cooljet, Power on Time Hours: 17,521, Running Hours: 3,382, Cutting Hours: 4,447. S/No. 476 (2006)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 4: Daewoo Mynx 540 CNC Vertical Machining Centre

Daewoo Mynx 540 CNC Vertical Machining Centre with Fanuc 21MB Control, Table Size: 1200mm x 500mm, Swarf Conveyor, Cooljet, Power on Time Hours: 21,980, Running Hours: 7,452, Cutting Hours: 6,777. S/No. 1986 (09/2004)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 5: Daewoo Puma 400B CNC Lathe

Daewoo Puma 400B CNC Lathe with Fanuc 32i Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye & Swarf Conveyor, Power on Time Hours: 8,317, Running Hours: 4,361, Cutting Hours: 3,267. S/No. 4449 (2011)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 6: Daewoo Puma 400B CNC Lathe

Daewoo Puma 400B CNC Lathe with Fanuc 21i-TB Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye, 530mm Chuck, Swarf Conveyor, Power on Time Hours: 12,246, Running Hours: 6,007, Cutting Hours: 4,395. S/No. 2249 (2006)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 7: Daewoo Puma 400LB CNC Lathe

Daewoo Puma 400LB CNC Lathe with Fanuc 18-iT Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 2100mm between Centres, Tooleye, Swarf Conveyor & 450mm Chuck, Power on Time Hours: 24,306, Running Hours: 7,709, Cutting Hours: 7,466. S/No. 1100 (2001)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 8: Daewoo Puma 2600L CNC Lathe

Daewoo Puma 2600L CNC Lathe with Fanuc i Series Control, Swing over Bed: 630mm, Swing over Saddle: 500mm, 1500mm between Centres, 12" Chuck, Tooleye & Parts Catcher, Power on Time Hours: 3,548, Running Hours: 1,700, Cutting Hours: 875. S/No. 374 (2013)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 9: Daewoo Puma 280 CNC Lathe

Daewoo Puma 280 CNC Lathe with Fanuc 21-TB Control, Swing over Bed: 630mm, Swing over Saddle: 500mm, 630mm between Centres, 12" Chuck, Tooleye, Parts Catcher, Power on Time Hours: 17,939, Running Hours: 6,514, Cutting Hours: 4,474. S/No. 746 (2006)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 10: Daewoo Puma 240L CNC Lathe

Daewoo Puma 240L CNC Lathe with Fanuc i Series Control, Swing over Bed: 550mm, Swing over Saddle: 390mm, 630mm between Centres, Tooleye, 12" Chuck, Swarf Conveyor & Cooljet, Power on Time Hours: 17,939, Running Hours: 6,514, Cutting Hours: 4,474. S/No. 746 (2004)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking