2586 - Mazak Integrex E-650-H Multi Tasking Machine, Okuma CNC Lathe & Daewoo, Mazak & Bridgeport Machining Centres no longer required by John Hyde & Others

Engineering

Auction ends on

2017-05-24 15:00:00.0
Add to calendar

Time left

Bidding ended

Auction description

Please Note: Lots 100, 101, 102, 103 are located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Lot 104 is located in Stoke. Unfortunately there are no loading facilities available. Blocking and Securing will be at the cost of the Purchaser.

Lot 105 is located in Birmingham and can only be loaded to a suitable vehicle by our authorised transport. The loading fee for this lot will be £100. Blocking and securing will be at the cost of the purchaser.

Buyers premium

Buyers Premium will be charged at 16.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing will be available by appointment only with the Auctioneer.

Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2017-05-26 17:00:00.0

Final clearance date

2017-06-08 17:00:00.0

Shipping agents

Storage contractors

Lots 1-6 of 6

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
24 May 2017 15:50:00 BST
Time left:
Bidding ended
Increment:
£500
Bids:
31
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 100: Daewoo ACE-HP5000 Twin Pallet Horizontal Machining Centre

Daewoo ACE-HP5000 Twin Pallet Horizontal Machining Centre with Fanuc 18i-MB Control, Max. Spindle Speed: 14,000rpm, BT 40 Spindle Taper, X = 850mm, Y = 700mm, Z = 750mm, Rapid Feed Rate: 48m/min, Pallet Dimensions: 500 x 500mm, 60-Station ATC, Through Spindle Coolant, Renishaw NC4 Tool Presetter, Renishaw Probe Interface (please note: there is no probe included with this machine), Swarf Conveyor, Spindle Chiller. S/No. HP540065 (02/2005)

Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

 

Preview image
Ends:
24 May 2017 16:30:00 BST
Time left:
Bidding ended
Increment:
£250
Bids:
20
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 101: Mazak AJV 32/604N Bridge Type Vertical Machining Centre

Mazak AJV 32/604N fitted with Mazatrol M32 control system. Axis travels X=1500mm Y=700mm Z=460mm. Maximum spindle speed 4000rpm. ISO40 spindle taper. 40 Station ATC. Table dimensions 1740mmx650mm. Distance between columns 800mm. Maximum load on table 1500Kg. S/No. 106449 (1993) 

Please Note: This Lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Preview image
Ends:
24 May 2017 16:10:00 BST
Time left:
Bidding ended
Increment:
£250
Bids:
29
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 102: Bridgeport 500 XP Vertical Machining Centre

Bridgeport 500 XP Vertical Machining Centre with Heidenhain TNC 410M Control, Max. Spindle Speed: 12,000rpm, X = 500mm, Y = 340mm, Z = 520mm, BT40 Spindle Taper, 16-Station ATC, Table Size: 360 x 830mm. S/No. 722863 (2001)

Please Note: This Lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Preview image
Ends:
24 May 2017 17:30:00 BST
Time left:
Bidding ended
Increment:
£250
Bids:
94
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 103 : Okuma Macturn 30 Multi-Axis CNC Lathe

Okuma Macturn 30 Multi-Axis CNC Lathe with Okuma OSP 7000L Control, Swing Over Bed: 500mm, Max Turning Diameter: 500mm, Max Turning Length: 1000mm, X = 430mm, Y = 190mm, Z = 1090mm, Spindle Speeds: 45 - 4500rmp, BT40 Spindle Taper, 62mm Spindle Bore, Rapid Feed Rates X=20m/min Z=25m/min Y=12m/min, 80 Station ATC, Swarf  Conveyor, Renishaw Probe Interface and Probe, Coolant Filtaration, Imeca Barfeed, 3 Jaw Chuck, (2) Collet Chucks, Tailstock. S/No. 0017 (5/1999)

Please Note: This Lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Preview image
Ends:
24 May 2017 15:50:00 BST
Time left:
Bidding ended
Increment:
£1000
Bids:
65
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 104: Mazak Integrex e-650H Multi-tasking Turning/Milling Centre

Mazak Integrex e-650H Multi-tasking Turning/Milling Centre, with Mazatrol pc-fusion-cnc 640m Pro Control System, Maximum Spindle Speed 1400rpm, Maximum Milling Spindle Speed 10000rpm, (1200rpm chuck limitation), BT50 spindle taper, Axis Travels X=1025mm Y=605mm Z=2105mm C=360 degrees (0.0001), B=240 degrees (+210/-30), Rapid feed rates X/Y/Z=40m/min, Maximum Swing 920mm, Programable tailstock, Quill travel 160mm, 170mm spindle bore, Distance between centers 2300mm, 80 station ATC, 450mm 3 Jaw chuck, Swarf conveyor, Through Spindle Coolant, Absolent ODF1000 filter Mist Unit, Swarf Skip, Renishaw mp700 probe. S/No. 159928 (7/2002)

Please Note: This Item is located in Stoke. Unfortunately there are no loading facilities ...

Preview image
Ends:
24 May 2017 17:30:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
64
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 105: Hurco BMC 4020 SSM Vertical Machining Centre

Hurco BMC 4020 SSM Vertical Machining Centre with Ultimax CNC Control, 1250 x 510mm Table, 24-ATC, ISO 40 Taper. S/No. 912SM9100908800

Please Note: This Lot is located in Birmingham and can only be loaded to a suitable vehicle by our authorised transport. The loading fee for this lot will be £100. Blocking and securing will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Categories