2585 - Doosan Lathe and Vertical Machining Centre's surplus to requirements at James Brown Industries
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These Lots are located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-3 de 3
Lot 1: Doosan Puma 2600M 3 Axis Lathe
Doosan Puma 2600M 3 Axis Lathe with Doosan-Fanuc I Control, Maximum Spindle Speeds Main 3500rpm, Milling speed 5000rpm, Axis travels X=260mm Z=830mm C=360 degrees (0.001), Rapid feed rates X/Z=30m/min, 12/24, Station Turret (half indexing), Distance between centre’s 800mm, 76mm spindle Bore, Programable Tailstock., 3 Jaw Chuck (to be fitted), Tool Presetter, Parts Catcher, Swarf Conveyor, Machine has (2) x Driven Tools and (2) Z Driven Tools, Set of Manuals. S/No. ML0103-000377 (2012)
Please Note: This lot is located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 2: Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre
Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre, Maximum Spindle Speed 10000rpm, BT40 Spindle Taper, Axis Travels X=762mm, Y=516mm, Z=570mm, (Note X=764mm Y=519mm Z=573mm set in parameters), Rapid Feed Rates X/Y=40m/min Z=32 m/min, 30 Station ATC, Table Dimensions 860mm x 570mm, Load per Pallet 350kg, Swarf Conveyor, Through Spindle Coolant, Spindle Oil Chiller. S/No. MNV0061-000074 (02/2012)
Please Note: Tooling and Fixtures are not included in this lot.
Please Note: This lot is located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 3: Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre
Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre, Maximum Spindle Speed 10000rpm, BT40 Spindle Taper, Axis Travels X=762mm, Y=516mm, Z=570mm, (Note X=764mm Y=518mm Z=579mm set in parameters), Rapid Feed Rates X/Y=40m/min Z=32 m/min, 30 Station ATC, Table Dimensions 860mm x 570mm, Load per Pallet 350kg, Swarf Conveyor, Through Spindle Coolant, Spindle Oil Chiller. S/No. V0026-000018 (07/2011)
Please Note: Tooling and Fixtures are not included in this lot.
Please Note: This lot is located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.